FILARC flux - Esab

More documents

Recommendations

Info

FILARC flux- andmetal- coredwelding wiresFILARC PZ6159DIN8555 : MF3-50TContents page 4Previous pageNext pageDESCRIPTIONMetal-cored wire depositing amartensitic weld metal with hardtungsten carbides. The deposit has awarm hardness up to 500°C and isresistant to tempering. Machining ispossible by grinding only.The PZ 6159 is applied for hardfacingparts which are subjected to hightemperatures as used in steel manufacture;e.g. heat treatment furnaces,hot shear blades and tong pins.WELD METAL COMPOSITIONC : 0.30-0.45% V : 0.30-0.50%Si : 0.90-1.30% Co : 1.80-2.20%Mn: 0.90-1.30% W : 7.50-8.50%Cr : 1.60-2.00%Mo: 0.30-0.50%SHIELDING GASCO 2 and Ar/20%CO 2EN 439: C1, M21POSITIONSDEPOSITION DATA IN: CO 2 and Ar/20%CO 2Diameter1.6mmStickout20mmI V wire Dep. rate[A] [m/min] [kg/h]150 2.4 1.8250 4.5 3.4350 8.4 6.3450 11.9 9.0HARDNESSHardness of 3 rd layer:Hv : 500-600HRC: 49-55CURRENTANDPOLARITYDC +108
FILARC flux- andmetal- coredwelding wiresFFILARC PZ6163DIN 8555 : MF5-400GCContents page 4DESCRIPTIONWELD METAL COMPOSITIONPrevious pageNext pageMetal cored wire alloyed with 17%Cr C : 0.15-0.20%DEPOSITION DATA IN: Ar/20%CO 2and 1%Mo. Ideal for the hardfacing ofsteel mill rollers, because of its excellentcombination of hardness,strength and toughness coupled withSi : 0.50-0.90%Mn: 0.40-0.70%Cr : 16.0-18.0%Mo: 0.90-1.20%temper resistance and resistance tooxidation.SHIELDING GASAr/20%CO 2EN 439: M21POSITIONSDiameter1.6mmStickout20mmI V wire Dep. rate[A] [m/min] [kg/h]150 2.4 1.8250 4.5 3.4350 8.4 6.3450 11.9 9.0HARDNESSHardness of 3 rd layer:Hv : 350-450HRC: 36-45CURRENTANDPOLARITYDC +109
Page 1 and 2:
FILARC flux- andmetal- coredwelding
Page 3 and 4:
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60: FILARC flux- andmetal- coredwelding
Page 109: FILARC flux- andmetal- coredwelding
show all

FILARC flux - Esab

Create successful ePaper yourself

Delete template?

Save as template?