FILARC flux - Esab

FILARC flux- andmetal- coredwelding wiresFILARC PZ6414AWS A5.9-93 : EC309LDIN 8556 : SG 23 12 L (Werkst.nr.: 1.4332)Contents page 4Previous pageNext pageDESCRIPTIONMetal-cored wire for welding dissimilarsteels and for welding buffer layersin the case of clad steels, or steels tobe surfaced with an 18/10 cladding.Also suited for welding AISI 309, AISI410 and AISI 430 type stainless steels.The absence of slag and a low spatterlevel are further advantages makingthe wire very suited for mechanisedand robotic operation.For welding thinner plates or forimproved positional welding, pulsedMIG operation can be applied. UseAr/2%O 2 or Ar/2%CO 2 shielding gas.WELD METAL COMPOSITIONC : ≤0.03% P : ≤0.025%Si : 0.50-0.70% S : ≤0.020%Mn: 1.00-1.50%Cr : 22.0-25.0% FN : ~15Ni : 12.0-14.0%SHIELDING GASAr/2%O 2 or Ar/2%CO 2APPROVALSsee pages13 to17for gradesContr.POSITIONSDEPOSITION DATA IN: Ar/2CO 2Diameter1.6mmStickout20mmI V wire Dep. rate[A] [m/min] [kg/h]150 2.4 1.8250 4.5 4.0350 7.9 7.0450 11.2 10.0CURRENTANDPOLARITYALL WELD METAL MECHANICAL PROPERTIESDC +Tensile strength, R m[MPa]: ≥515Proof stress, R p0.2[MPa]: ≥320Elongation, A 5 [%] : ≥32Impact value, A v (ISO-V) +20°C [J] : ≥60CERAMICBACKING90