FILARC flux - Esab
FILARC flux - Esab
FILARC flux - Esab
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>FILARC</strong> <strong>flux</strong>- andmetal- coredwelding wiresF<strong>FILARC</strong> PZ6422AWS A5.9-93 : EC2209DIN/prEN : SG 22 9 3 L ~ (Werkst.nr.: 1.4462 ~)Contents page 4DESCRIPTIONWELD METAL COMPOSITIONPrevious pageNext pageMetal-cored wire for welding duplexstainless steels. Designed for depositingsingle and multi-layer standingfillet welds at high welding currentsand high travel speeds. The absenceof slag and a low spatter level arefurther advantages making the wirewell suited for mechanised and roboticoperation. Also frequently appliedfor cladding purposes. Associatedpositional work can be covered aswell. Thin material can be welded withpulsed MIG operation.Use Ar/2%O 2 or Ar/2%CO 2 shieldinggas. Root passes can be depositedeconomically on ceramic backingstrips.C : ≤0.03% P : ≤0.025%Si : 0.50-0.90% S : ≤0.025%Mn: 0.50-1.00%Cr : 21.0-23.0% FN : 30-50Ni : 8.0-10.0%Mo: 2.75-3.25%N : 0.11-0.17%SHIELDING GASAr/2%O 2 or Ar/2%CO 2POSITIONSDEPOSITION DATA IN: Ar/2CO 2Diameter1.2mmStickout15mmI V wire Dep. rate[A] [m/min] [kg/h]150 5.3 2.2250 10.9 4.6350 16.4 7.0CURRENTANDPOLARITYALL WELD METAL MECHANICAL PROPERTIESDC +Tensile strength, R m[MPa]: ≥690Proof stress, R p0.2[MPa]: ≥500Elongation, A 5 [%] : ≥25Impact value, A v (ISO-V) – 20°C [J] : ≥60– 50°C [J] : ≥45CERAMICBACKING86