FILARC flux - Esab

FILARC flux- andmetal- coredwelding wiresFFILARC PZ6111HSAWS A5.20-95 : E70T-1 H8 ~E70T-1M H8 ~EN 758-97 : T 42 2 1Ni R C 3 H10T 46 2 1Ni R M 3 H10Contents page 4Previous pageNext pageDESCRIPTIONHigh filling ratio rutile cored wire forhigh speed welding in downhandapplications, using CO 2 or Ar/CO 2gas shielding.Available in diameter 1.6mm only.Deposition rates up to 15kg/h can beobtained with conventional equipment.Excellent weldability and easy slagrelease.Flat welds with good tie-in make thiswire well suited for welding dynamicallyloaded components, for instance,road construction machinery.Intended for the mechanised weldingof downhand (multi-layer) butt andfillet welds, and standing fillet welds.WELD METAL COMPOSITIONC : 0.04-0.07% P : ≤0.025%Si : 0.30-0.60% S : ≤0.025%Mn: 0.70-1.10%Ni : 0.60-0.90%SHIELDING GASCO 2 and Ar/15-25%CO 2EN 439: C1, M21WELD METAL HYDROGENEuronorm 758-95: class H5Typical values in Ar/20%CO 2: 5.9ml/100gin CO 2: 5.1ml/100g(valid for Ø1.6mm/300A/20mm stick-out)APPROVALSsee pages13 to17for gradesABSBVCCSDBDNVFORCEGLLRMRSPRSTÜVUDTPOSITIONSDEPOSITION DATA IN: CO 2 or Ar/CO 2DiameterStickout1.6mm20mmI V wire Dep. rate[A] [m/min] [kg/h]250 6.5 4.0350 11.9 7.5450 19.1 12.1CURRENTANDPOLARITYALL WELD METAL MECHANICAL PROPERTIESDC +CO 2 Ar/15-25%CO 2Tensile strength, R m [MPa]: 510-580 545-630Yield strength, R e [MPa]: ≥420 ≥460Elongation, A 5 [%] : ≥22 ≥22Impact value, A v (ISO-V) – 20°C [J] : ≥47 ≥47CERAMICBACKING49