Quick Reference for End-Users CarboSen1000 Sensors ... - lamtec

More documents

Recommendations

Info

5 Menu5 Menu5.1 Switching on the Operating UnitThe display of the programming unit shows the following starting sequence after the systemis switched on:The display shows the start window.The starting sequence runs automatically.The display shows the version (an examplehere) of the loaded software.The starting sequence runs automatically..Program loading.Please confirm the question. If youwould like to change the sensor orthe control parameter(s), youshould proceed with the installationroutine.Alternatively, you can acknowledgethe question and skip theinstallation routine.For an accurate execution of the installation routine, the CarboSen1000 must be cooled downto approximately 20°C (take note of cooling time). In addition, the sensor is not allowed to beexposed to supply air.17
5 MenuAfter completion of the installation routine orrather after skipping the installation routine,the sensor would be heated up to operatingtemperature.Please use the , keys to switchto the selection menu.5.2 Main MenuFig. 5-1 Main Menu1 preset reference characteristic line for fuels, Release Level2 CO e -Display in ppm (with calculated characteristic curve)3 Sensor voltage of electrode 14 Sensor voltage of electrode 25 Open window6 Help7 Menu8 Switch to another window (Measuring Values -> Limit Values -> LSB) Remote - Shutdown Help Menu Switch to another windowBack one level beforeRelease Level 0 - no password necessaryRelease Level = a digit after the key icon shows that password entry is needed18
Page 4 and 5: Table of Contents6 OPERATION . . .
Page 6 and 7: 1 General Information1 General Info
Page 8 and 9: 2 Safety2.2 For Your SafetyIn this
Page 10 and 11: 3 Technical Description3 Technical
Page 12 and 13: 3 Technical Description3.3 Sensor E
Page 14 and 15: 4 Installation and CommissioningPlu
Page 16 and 17: 4 Installation and Commissioning4.3
Page 20 and 21: 5 Menu5.2.1 Help WindowTo switch to
Page 22 and 23: 5 Menu5.3.4 Control ValuesPlease us
Page 24 and 25: 5 Menu5.3.6 COe CurvesPlease use th
Page 26 and 27: 5 Menu5.3.7 LSB Configuration25
Page 28 and 29: 5 MenuNOTICE!You can upload import
Page 30 and 31: 6 Operation6.2.3 Performing Sensor
Page 32 and 33: 6 Operation6.2.5 Initiate the Cold
Page 34 and 35: 6 Operation6.2.6 Changing the Senso
Page 36 and 37: 6 Operation6.2.8 Setting the Limit
Page 38 and 39: 8 Accessories8 Accessories8.1 Progr
Page 40 and 41: 8 Accessories8.4 Digital Input Modu
Page 42 and 43: 9 Technical Data9 Technical DataEle
Page 44 and 45: 10 Ordering Information10 Ordering
Page 46 and 47: 11 FAQbasic principle, the lower th
Page 48 and 49: 12 Error Detection and Measurements
Page 50 and 51: 14 Declaration of Conformity14 Decl
Page 52: 14 Declaration of Conformity51

Quick Reference for End-Users CarboSen1000 Sensors ... - lamtec

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?