Quick Reference for End-Users CarboSen1000 Sensors ... - lamtec

5 Menu5.3.5 Configuration SensorPlease use the and to navigate. The displayed value cannot be changed. Please confirmthe entry with key. You can only change the values, when you are categorized underthe corresponding release level.(RL0 = Release Level 0, RL1 = Release Level 1)Smooth start-up:The value that you entered here would be defined by the time frame as a value where the heatingpower would raise from 0 to the setpoint.WARNING!Values smaller than 30 sec are critical!You could damage the heating structure, if you enter values smaller than 30 sec.Sensor type:Type A = Clip housingType C = Rod housing / CarboSen1000 STNOTICE!The false selection of sensor type would affect the heating control.22