Quick Reference for End-Users CarboSen1000 Sensors ... - lamtec

5 Menu5.3.8 Parameter ConfigurationPlease use the and keys to navigate. The displayed values cannot be changed.Please confirm the entry with key. You can only change the values, when you are categorisedunder the corresponding release level.(RL0 = Release Level 0, RL1 = Release Level 1)LSB-Address:Please set the address of your LSB module(s) here. A false entry would lead to a communicationfailure to the LSB module.Value range:Please set the value range for analogue output to 0...20mA or 4...20mA.0mA would generate an error message in the value range of 4...20mA.Measurement Values LSBAA2 - LSBAA5:Please set the measurement of which the sensor should emit in the analogue output 2-5.Threshold 1:Please set the thresholds for digital output; when the relay opens and closes respectively.Reset threshold:Please select how the limit values should be set back to its default status.Please use the and keys to navigate. The displayed values cannot be changed.Please confirm the entry with key. You can only change the values, when you are categorisedunder the corresponding release level.Read and write dataset:You can read and write set of parameters through the dataset from the device.26