Quick Reference for End-Users CarboSen1000 Sensors ... - lamtec

5 Menurised under the corresponding release level.(RL0 = Release Level 0, RL1 = Release Level 1)Calibration:Please activate the device for selection of fuel characteristic line. With the activated device,you could switch between fuel input 0 and fuel input 1.Fuel Input 0 / Fuel Input 1:Please select the characteristic line for sensor voltage conversion (fuel input 1 as well as fuelinput 2).A false setting would lead to false values.Default = Factory characteristic lineCurve selection:You can use this selection, when you have not used any control system for fuel input 0.Custom curve:Please post a maximum of 10 points for the programming of a customised curve. The pointsmust be numerically sorted (ascending/descending). If the values are not numerically sorted,this would lead to a false display of CO e -values.24