Quick Reference for End-Users CarboSen1000 Sensors ... - lamtec

8 Accessories8.2 Analogue Output Module with address 19 for Display of Measurement SignalsFig. 8-3 analogue output module• 4 analogue output 0...10VDC (non-floating) or item no. 663 R 4025or• 4 analogue output (non-floating)item no. 663 R 4029• for producing:– average sensor voltage– sensor voltage 1– sensor voltage 2– heating power– internal resistance of heating– pulse width heating– internal resistance of sensors– CO eAdjustable in parameter 810...825 of the CarboSen1000 STNOTICE!Please check the accuracy of the preset module address!8.3 Digital Output Module with module address 03• 4 relay output 250 V, 6 A (floating) item no. 663 R 40275• Output 1 – Limit value 1Output 2 – Limit value 2Output 3 – not measuredOutput 4 - fault• Manually operated emergency menuSetting „1“ Output contact closed at all timesSetting „A“ Output contact switch over to LSBSetting „0“ Output contact opened at all timesFig. 8-4 digital output moduleNOTICE!Please check the accuracy of the preset module address!38