Quick Reference for End-Users CarboSen1000 Sensors ... - lamtec

More documents

Recommendations

Info

6 Operation6.2.5 Initiate the Cold Resistance Determination31
6 OperationIf you want to start the definition of the cold resistance, proceed as described in chapter 5.1and confirm a change of the sensor or start from the main menu with (see chapter 5.2).1)WARNING!Watch the sensor’s temperature!Proceed the definition of the cold resistance only, if your sensor has cooled down to ambienttemperature.If the sensor is too warm, you will get a wrong result and the sensor may be damaged.Let the sensor cool down <strong>for</strong> at least 5 min. A longer cool down period will be better.Check the your sensor’s temperature.2)NOTICE!Protect your sensor from air drought.If your sensor is exposed to air draught during the definition of the cold resistance, this mayfalsify the result or the measurement fails.Take care <strong>for</strong> a air draught free environment.Press keyto end the definition of the cold resistance. The installation starts.32
Page 4 and 5: Table of Contents6 OPERATION . . .
Page 6 and 7: 1 General Information1 General Info
Page 8 and 9: 2 Safety2.2 For Your SafetyIn this
Page 10 and 11: 3 Technical Description3 Technical
Page 12 and 13: 3 Technical Description3.3 Sensor E
Page 14 and 15: 4 Installation and CommissioningPlu
Page 16 and 17: 4 Installation and Commissioning4.3
Page 18 and 19: 5 Menu5 Menu5.1 Switching on the Op
Page 20 and 21: 5 Menu5.2.1 Help WindowTo switch to
Page 22 and 23: 5 Menu5.3.4 Control ValuesPlease us
Page 24 and 25: 5 Menu5.3.6 COe CurvesPlease use th
Page 26 and 27: 5 Menu5.3.7 LSB Configuration25
Page 28 and 29: 5 MenuNOTICE!You can upload import
Page 30 and 31: 6 Operation6.2.3 Performing Sensor
Page 34 and 35: 6 Operation6.2.6 Changing the Senso
Page 36 and 37: 6 Operation6.2.8 Setting the Limit
Page 38 and 39: 8 Accessories8 Accessories8.1 Progr
Page 40 and 41: 8 Accessories8.4 Digital Input Modu
Page 42 and 43: 9 Technical Data9 Technical DataEle
Page 44 and 45: 10 Ordering Information10 Ordering
Page 46 and 47: 11 FAQbasic principle, the lower th
Page 48 and 49: 12 Error Detection and Measurements
Page 50 and 51: 14 Declaration of Conformity14 Decl
Page 52: 14 Declaration of Conformity51

Quick Reference for End-Users CarboSen1000 Sensors ... - lamtec

Create successful ePaper yourself

Delete template?

Save as template?