CH-TRAMPAC - Waste Isolation Pilot Plant - U.S. Department of ...

CH-TRAMPAC Document Rev. 2, May 20052.5.2 Methods of Compliance and VerificationCompliance shall be by one, or a combination, of the following methods:• Administrative and procurement controls demonstrating that filter vents have beenprocured to the specifications of Section 2.5.1.• Visual inspection to the specifications of Section 2.5.1.• Sampling by measurement of filter characteristics to the specifications of Section 2.5.1.If sampling by measurement is selected as the compliance method, the test methods used todetermine the compliance of filter vents or equivalent venting mechanisms with the minimumperformance-based requirements specified in Table 2.5-1 and this section shall be directed byprocedures under a QA program. For equivalent venting mechanisms, compliance with theminimum total hydrogen diffusivity per container type specified in Table 2.5-1 shall bedemonstrated through documentation for the equivalent venting mechanism used.2.5-3