CH-TRAMPAC - Waste Isolation Pilot Plant - U.S. Department of ...

CH-TRAMPAC Document Rev. 2, May 2005Table 2.9-16 – 12-inch Pipe Component WeightsWeightItem Type S200-A (pounds) S200-B (pounds)Shield Insert Body Nominal 134 129Shield Insert Lid Nominal 43 27Shield Insert Dunnage Nominal 18 15Payload Nominal 25 50Total (Contents) Maximum 225 225Total (Pipe Component) Maximum 407 407Table 2.9-17 identifies material content forms authorized for transport within an S200 pipeoverpack.Table 2.9-17 – S200 Pipe Overpack: Material Content Forms Authorizedfor TransportForm Number123DescriptionDirect load: Solids, any particle size (e.g., finepowder or inorganic particulates)Direct load: Solids, large particle size (e.g.,sand, concrete, or debris)Direct load: Solids, large objects (e.g., metalcans containing waste)2.9-15