CIMCO

More documents

Recommendations

Info

100From the CNC-Calc menu, select Milling Operations and Mill TrueType letters, or click thecorresponding icon on the toolbar.The Letter Milling dialog has now appeared to the left. Click on the Parameters button.The TrueType Text Milling Parameters dialog appears. Check the Mill Outline checkboxat the top and fill in the rest of the fields as shown below. Click ‘OK’ when done.
101Use window selection to select the letters to mill. This is done by left-clicking in the upperleftcorner of the drawing. Now hold the mouse button down and drag the cursor to thelower-right corner and release the mouse button. Click on the button Show Toolpath. Nowthe screen will show the generated toolpaths which is layed out directly over the outline ofthe text (it might be hard to see). Finally click on the button Export Editor.Now the NC-codes for the machining are shown in the editor. Use the Graphical Backplot tosimulate and verify the toolpaths. To start the backplot click on the Backplot menu and thenon Backplot Window.Use the buttons in the lower-right corner of the window to control the simulation speed anddirection. By clicking on a line in the NC-code to the left the tool will jump to that positionin the simulation. The up and down key moves the line selection to the previous or next line,and the tool will be moved acordingly.
Page 3:
3CIMCO CNC-Calc 2.5 User Guide© 19
Page 6:
6Notice:The accompanying software i
Page 9 and 10:
94.InstallationCNC-Calc v2 is insta
Page 11 and 12:
Most of the functions in CNC-Calc v
Page 13 and 14:
137.7.1.ToolbarsToolThe Tools toolb
Page 15 and 16:
15Horizontal will draw a horizontal
Page 17 and 18:
17Tangent through Point lets you de
Page 19 and 20:
197.5.ModifyThe Modify toolbar modi
Page 21 and 22:
21Pocket Milling creates pocket ope
Page 23 and 24:
238.MenusMost of the CNC-Calc v2 fu
Page 25 and 26:
25Tangent AngleTangent Through Poin
Page 27 and 28:
27Simple Text Circular AlignmentTru
Page 29 and 30:
29Ctrl- Backspace.Zoom inZoom outZo
Page 31 and 32:
31Export ContourCalculatorCan expor
Page 33 and 34:
33It is important to select the cor
Page 35 and 36:
35Rotary axisIf Y-axis substitution
Page 37 and 38:
3711. Other configurations thataffe
Page 39 and 40:
3912.1.Before you startThe first th
Page 41 and 42:
4112.1.Draw the geometryDraw a rect
Page 43 and 44:
43Offset a circleClick onin the too
Page 45 and 46:
45Mirror elements about mirror line
Page 48 and 49:
4813. Tutorial 2CNC-toolpaths and F
Page 50 and 51: 50You should now see the part from
Page 52 and 53: 52Retract Height: When the operatio
Page 54 and 55: 54In order to use the feed and spee
Page 57 and 58: 5714.Tutorial 3Contour millingCNC-C
Page 61 and 62: 61This dialog contains all the gene
Page 63 and 64: 63Depth cuts are the cuts taken in
Page 65 and 66: 65Now close the parameters dialog w
Page 67 and 68: 15.Tutorial 4Pocket millingCNC-Calc
Page 71 and 72: 71rapid to cutting speed.Start Dept
Page 73 and 74: 73Depth cuts are the cuts taken in
Page 75 and 76: 75Line Length:Is the length of the
Page 77 and 78: 16.Tutorial 5Backplot in the Editor
Page 79 and 80: 7916.2. The first backplotWhen you
Page 81 and 82: 81After the tools have been configu
Page 83 and 84: Now everything has been configured,
Page 85 and 86: 85To make a new drawing you must cl
Page 87 and 88: 87For the selection of the location
Page 89 and 90: 8918.Tutorial 7Milling of LettersTh
Page 91 and 92: 91Your screen should now look like
Page 93 and 94: 93Now use window selection to selec
Page 95 and 96: It is very important to verify/simu
Page 97 and 98: 97To start a new drawing, either cl
Page 99: 99With parameters, text, and font d
Page 103 and 104: 1031.Window select the text.1. Clic
show all

CIMCO

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?