CIMCO

94If you want to verify a certain operation in the NC program, simply click on a line of the NCcode to the left. The simulation tool will immediately position itself on the correspondingplace in the simulation. You can move the tool one line at a time using the up and downarrow keys on your keyboard, or skip through the code a page at a time using PageUp andPageDown.Your screen should now present “CIMCO 123” in the following way.Notice the rapid moves, indicated by the yellow lines, retracting to the level we defined usingthe Parameters dialog.The example text milling program “CIMCO 123” can be used as subprogram to anotherprogram by simple cut-and-paste, but can also be completed as an independent program,providing it is supplied with the code lines for Program Start/Program Stop, Tool Change,and Feed/Speed, which you can quickly add either manually or with the Macro function inCIMCO Edit 5.Important noticeThe final execution of the program depends to a high degree of the applied macro programs.It is also important that the correct set-up of CNC-Calc is used for each machine/control.