CIMCO

72Side cuts are the cuts taken in the XY direction.Use Side Cuts: If this check box is checkedthe operation will perform the cuts defined bythe parameters. Otherwise only one cut at thefinal contour will be performed.Max Roughing Spacing: This is themaximum side step over used in the roughingof the part.Number of Passes (Finish): This is thenumber of finish side cuts in the operation.Spacing (Finish): This is the distance of eachfinish pass.At Final Depth: If this check box is checked,the finish passes will only be taken at the finaldepth.At All Depths: If this check box is checked,the finish passes will be taken at every depth.Overlap Distance: This is the distance thatall the finish laps will overlap, in order tosmooth the surface.Roughing Smoothing: This slider controlsthe amount of smoothing used. The higher thevalue (rightmost), the smoother the resultingtoolpath will be.