DC3500 AT Commands Manual 500242R01 ... - Cooking Hacks

More documents

Recommendations

Info

DC3500 AT Commands Reference Manual 500242R0110.18. Fixed DTE rate +IPRDescriptionThis command specifies the data rate at which the DCE will accept commands. The full range of datarate values may be reduced dependent on HW or other criteria.SyntaxCommand syntax: AT+IPR=[]CommandAT+IPR=9600Read commandAT+IPR?Test commandAT+IPR=?Possible response(s)OKorCME ERROR: +IPR: 9600OK+IPR: (list of supported autodetectable values) [,(list of fixed only values)]OKDefined values may be 0 meaning autobauding or 300, 1200, 2400, 4800, 9600, 19200, 38400, 57600,115200, 230400, 460800, 500000, 750000, 921600,1843200,3250000, 6000000 bps. Maybe not alllisted rates are available because they depend on the target.10.19. Escape character S2DescriptionThis command controls the decimal value of the ASCII character used as the escape character. Thedefault value corresponds to an ASCII ‘+’. A value over 127 disables the escape process, i.e. noescape character will be recognized. The escape sequence contains three escape characters e.g.“+++”.SyntaxCommand syntax: ATS2=CommandATS2=43Read commandATS2?Possible response(s)OKorCME ERROR: 043OKConfidential DAVISCOMMS (S) PTE LTD 106 /136
10.20. Command line termination character S3DC3500 AT Commands Reference Manual 500242R01DescriptionThis command sets a value which represents the decimal IRA5 value of the character recognized bythe DCE from the DTE to terminate the incoming command line. It is also generated by the DCE aspart of the header, trailer and terminator for result codes and information text, along with the S4setting.SyntaxCommand syntax: ATS3=CommandATS3=13Read commandATS3?Possible response(s)OKorCME ERROR: 013OKDefined values is in range 0 to 127; mandatory default is 13 carriage return character (CR, IRA5 0/13).10.21. Response formatting character S4DescriptionThis command sets a value which represents the decimal IRA5 value of the character generated bythe DCE as part of the header, trailer and terminator for result codes and information text, along withthe S3 setting.SyntaxCommand syntax: ATS4=[]CommandATS4=10Read commandAT+S4?Possible response(s)OKorCME ERROR: 010OKDefined values is in range 0 to 127; mandatory default is 10 line feed character (LF, IRA5 0/10).10.22. Command line editing character S5DescriptionThis command sets a value representing the decimal IRA5 character recognized by the DCE as arequest to delete from the command line the immediately preceding character.SyntaxCommand syntax: ATS5=[]CommandATS5=8Read commandATS5?Possible response(s)OKorCME ERROR: 008OKDefined values is in range 0-127; mandatory default value is 8 backspace character (BS, IRA5 0/8).Confidential DAVISCOMMS (S) PTE LTD 107 /136
Page 7 and 8:
DC3500 AT Commands Reference Manual
Page 9:
Page 12 and 13:
Page 14 and 15:
4.4. Request product serial number
Page 16 and 17:
Page 18 and 19:
Page 20 and 21:
4.16. PCCA STD-101 [17] select wire
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
5.12. Service class selection and i
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Defined values parameter sets/shows
Page 38 and 39:
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Defined values may be:- 0: query th
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57: DC3500 AT Commands Reference Manual
Page 70 and 71: 7.27. Price per unit and currency t
Page 86 and 87: 8.19. Select cell broadcast message
Page 92 and 93: 9.15. Phase C received EOL alignmen
Page 118 and 119: 11.4. SIM-APPL-TK terminal profile
Page 124 and 125: 12.1.4. Quality of service profile
Page 130 and 131: 12.1.14. Select service for MO SMS
Page 132 and 133: 12.3. Extended Packet Domain AT Com
Page 136: DC3500 AT Commands Reference Manual
show all

DC3500 AT Commands Manual 500242R01 ... - Cooking Hacks

Create successful ePaper yourself

Delete template?

Save as template?