DC3500 AT Commands Manual 500242R01 ... - Cooking Hacks

More documents

Recommendations

Info

DC3500 AT Commands Reference Manual 500242R017.4. Enter PIN + CPINDescriptionThis set command sends to the ME a password which is necessary before it can be operated. If noPIN request is pending, no action is taken towards ME and an corresponding error code is returned.If the PIN required is SIM PUK or SIM PUK2, the second pin is required. This second pin, ,is used to replace the old pin in the SIM.Note: Commands which interact with ME that are accepted when ME is pending SIM PIN, SIM PUK,or PH-SIM are: +CGMI, +CGMM, +CGMR, +CGSN, +CALM, +CBC, +CCID, +CDIS, +CEER, +CFUN,+CGREG, +CHUP, +CIND, +CLVL, +CMER, +CMUT, +CMUX, +CPAS, +CPIN, +CPWROFF, +CRC,+CREG, +CRSL, +CSQ, +CSSN, +GMI, +GMM, +GMR, +TRACE, +WS46, +XBANDSEL, +XL1SET,+XMER, +XCALLSTAT, +XSIMLG, +XSIMSTATE, (+CPBS for “EC”), +XPINCNT, +XSIMCHG,+XSECSTATE, AT&D, AT&F, ATO, ATZ, D112SyntaxCommand syntax: AT+CPIN=[,]CommandAT+COPS=0AT+CPIN=”0933”Read commandAT+CPIN?Test commandAT+CPIN=?Possible response(s)CME ERROR: SIM PINOKorCME ERROR: +CPIN: OKOKDefined values, are string type values. values may be:- READY: ME is not pending for any password- SIM PIN: ME is waiting SIM PIN to be given- SIM PUK: ME is waiting SIM PUK to be given- SIM PIN2: ME is waiting SIM PIN2 to be given- SIM PUK2: ME is waiting SIM PUK2 to be givenConfidential DAVISCOMMS (S) PTE LTD 52 /136
DC3500 AT Commands Reference Manual 500242R017.5. Battery charge +CBCDescriptionThis execution command returns battery status and battery charge level of the MT. Thecharge level will be also used to build and display the indicator “battchg” i.e. battery chargelevel in the response code +CIND and in the unsolicited result code +CIEV. The following mapping of“battchg” to exists:“battchg” - 0 < 17 %- 1 < 33 %- 2 < 50 %- 3 < 67 %- 4 < 83 %- 5 >= 83 %SyntaxCommand syntax: AT+CBCCommandAT+CBCTest commandAT+CBC=?Possible response(s)+CBC: ,OKorCME ERROR: +CBC:(list of supported ’s),(list ofsupported ’s)OKDefined values may be:- 0: MT is powered by the battery- 1: MT has a battery connected, but is not powered by it- 2: MT does not have a battery connected- 3: Recognized power fault, calls inhibited may be:- 0: battery is exhausted, or MT does not have a battery connected- 1...100: battery has 1-100 percent remainingConfidential DAVISCOMMS (S) PTE LTD 53 /136
Page 7 and 8: DC3500 AT Commands Reference Manual
Page 9: DC3500 AT Commands Reference Manual
Page 14 and 15: 4.4. Request product serial number
Page 20 and 21: 4.16. PCCA STD-101 [17] select wire
Page 26 and 27: 5.12. Service class selection and i
Page 36 and 37: Defined values parameter sets/shows
Page 44 and 45: Defined values may be:- 0: query th
Page 70 and 71: 7.27. Price per unit and currency t
Page 86 and 87: 8.19. Select cell broadcast message
Page 92 and 93: 9.15. Phase C received EOL alignmen
Page 102 and 103:
DC3500 AT Commands Reference Manual
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
11.4. SIM-APPL-TK terminal profile
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
12.1.4. Quality of service profile
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
12.1.14. Select service for MO SMS
Page 132 and 133:
12.3. Extended Packet Domain AT Com
Page 134 and 135:
Page 136:
show all

DC3500 AT Commands Manual 500242R01 ... - Cooking Hacks

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?