DC3500 AT Commands Manual 500242R01 ... - Cooking Hacks

More documents

Recommendations

Info

DC3500 AT Commands Reference Manual 500242R01Defined values may be:- 0: buffer unsolicited result codes in the TA- 1: discard unsolicited result codes when the V.24 interface is reserved for data; otherwisedisplay them on TE directly- 2: buffer unsolicited result codes in ATC when the V.24 interface is reserved and flush themafter reservation; otherwise display them on TE directly- 3: forward unsolicited result codes directly to the DTE can have the values:- 0: no keypad event reporting- 1: keypad event reporting via +CKEV: , (s. +CKPD) for those keys which arenot caused via +CKPD when the V.24 interface is not reserved- 2: keypad event reporting via +CKEV: , for all keys when the V.24 interface isnot reserved can have the values- 0: no display event reporting- 1: display event reporting via +CDEV: , when the V.24 interface is notreserved, for those elements which are not caused via +CDIS; indicates the elementorder number (as specified for +CDIS) and is the new value of text element; characterset used in is as specified by setting +CSCS;- 2: display event reporting via +CDEV: , for all elements when the V.24interface is not reserved can have the values:- 0: no indicator event reporting- 1: indicator event reporting using result code +CIEV: ,. indicates theindicator order number (as specified for +CIND) and is the new value indicator. Onlythe indicator events which are not caused by +CIND shall be indicated by the TA to the TE.- 2: indicator event reporting using result code +CIEV: ,. All indicator eventsshall be directed from TA to TE. may have the following values:- 0: TA buffer of unsolicited result codes defined within this command is cleared when 1...3 is entered- 1: TA buffer of unsolicited result codes defined within this command is flushed to the TEwhen 1...3 is entered (OK response shall be given before flushing the codes).7.12. Select phonebook memory storage + CPBSDescriptionThis command selects a phonebook memory storage for further usage in phonebook relatedcommands.SyntaxCommand syntax: AT+CPBS=[,]CommandPossible response(s)AT+CPBS=”SM”OKNote: selection of SIM phonebook orRead commandAT+CPBS?Test commandAT+CPBS=?CME ERROR: +CPBS: “SM”,25,150Note: used syntax+CPBS:[,,]OK+CPBS: “SM”,”FD”,”LD”,”BN”,”SN”,”EC”Note: (list of supported s)OKConfidential DAVISCOMMS (S) PTE LTD 58 /136
DC3500 AT Commands Reference Manual 500242R01Defined values string type using following values:- “SM”: SIM phonebook- “FD”: SIM fix-dialling phonebook (only valid with PIN2)- “LD”: SIM last-dialling phonebook- “BN”: SIM barred-dialling-number phonebook (only valid with PIN2)- “SN”: SIM service-dialling-number phonebook- “EC”: SIM emergency-call-codes phonebook (read only)- “ON”: Own number phone-book (read/write); content is also shown by +CNUM.- “IN”: Information numbers phonebook (read only)- “BL”: Blacklist phonebook (delete only)- “AP”*: Application phonebook – only available, if a UICC with an active USIM application ispresent- “ME”: MT phonebook (read only) – only in a full system build available- “MT”: MT+SM phonebook (read only) – only in a modem-only system build available- “DC”: MT dialled calls list (read only) – only in full system builds available or ifCRH_ACTIVATE is enabled- “MC”: MT missed calls list (read only) – only in full system builds available or ifCRH_ACTIVATE is enabled- “RC”: MT received calls list (read only) – only in full system builds available or ifCRH_ACTIVATE is enabled: string type value representing the PIN2-code required when selecting PIN2-codes above (e.g. “FD”) integer type value indicating the number of used locations in selected memory integer type value indicating the total number of locations in selected memory.*Not SupportedConfidential DAVISCOMMS (S) PTE LTD 59 /136
Page 7 and 8: DC3500 AT Commands Reference Manual
Page 9: DC3500 AT Commands Reference Manual
Page 14 and 15: 4.4. Request product serial number
Page 20 and 21: 4.16. PCCA STD-101 [17] select wire
Page 26 and 27: 5.12. Service class selection and i
Page 36 and 37: Defined values parameter sets/shows
Page 44 and 45: Defined values may be:- 0: query th
Page 70 and 71: 7.27. Price per unit and currency t
Page 86 and 87: 8.19. Select cell broadcast message
Page 92 and 93: 9.15. Phase C received EOL alignmen
Page 108 and 109:
DC3500 AT Commands Reference Manual
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
11.4. SIM-APPL-TK terminal profile
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
12.1.4. Quality of service profile
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
12.1.14. Select service for MO SMS
Page 132 and 133:
12.3. Extended Packet Domain AT Com
Page 134 and 135:
Page 136:
show all

DC3500 AT Commands Manual 500242R01 ... - Cooking Hacks

Create successful ePaper yourself

Delete template?

Save as template?