DC3500 AT Commands Manual 500242R01 ... - Cooking Hacks

More documents

Recommendations

Info

DC3500 AT Commands Reference Manual 500242R01 (type of message containing the unsollicited User-to-User Information Element)- 0: ANY- 1: SETUP (returned after +CLIP if presented, otherwise after every RING or +CRING)- 2: DISCONNECT- 3: RELEASE_COMPLETE< UUIE>: The User-user Information Element (as defined in 3G 24.008) in hexadecimal characterformat (for hexadecimal format, refer +CSCS).Note: If the TA does not distinguish the type of message containing the User-to-user informationElement, it can use the value for ANY message.6.22. eMLPP Priority Registration and Interrogation +CAEMLPPDescriptionThe execute command is used to change the default priority level of the user in the network. Therequested priority level is checked against the eMLPP subscription of the user stored on the SIM cardor in the active application in the UICC (GSM or USIM) EFeMLPP. If the user doesn't have subscriptionfor the requested priority level an ERROR or +CMEE ERROR result code is returned.The read command triggers an interrogation of the provision of the maximum priority level which theservice subscriber is allowed to use and default priority level activated by the user. If the service is notprovisioned, a result code including the SS-Status (?) parameter is returned.SyntaxCommand syntax: +CAEMLPP=CommandAT+CAEMLPP=1Read commandAT+CAEMLPP?Test commandAT+CAEMLPP=?Possible response(s)OKorCME ERROR: +CAEMLPP : ,OKOrCME ERROR: okDefined values: integer type parameter which identifies the default priority level to be activated in thenetwork, which may be:- (A: highest, for network internal use)- (B: for network internal use)- 0: for subscription- 1: for subscription- 2: for subscription- 3: for subscription- 4: lowest, for subscriptions. also 3GPP TS 22.067: Integer type parameter which identifies the default priority level which is activatedin the network; same values as defined for ;: Integer type parameter which identifies the maximum priority level for which theservice subscriber has a subscription in the network; same values as defined for .Confidential DAVISCOMMS (S) PTE LTD 48 /136
DC3500 AT Commands Reference Manual 500242R016.23. Calling name presentation +CNAPDescriptionThis command allows to control the name identification supplementary service (s. GSM02.96). Whenthe presentation of CNAP at the TE is enabled, the following unsolicited result code is displayed:+CNAP: [, ]This command is abortable (proprietary feature).SyntaxCommand syntax: AT+CNAP=[]CommandAT+CNAP=1Read commandAT+CNAP?Test commandAT+CNAP=?Possible response(s)OKOr CME ERROR: +CNAP: , OK+CNAP: (0,1)i.e. (list of supported s)OKDefined values parameter sets the result code presentation in the TA:- 0: disable- 1: enable parameter shows the subscriber CNAP service status in the network and may be:- 0: CNAP not provisioned- 1: CNAP provisioned- 2: unknown string type containing the calling party name.] may be:- 0: name presentation allowed- 1: presentation restricted- 2: name unavailable- 3: name presentation restricted string type containing the calling party name.] may be:- 0: name presentation allowed- 1: presentation restricted- 2: name unavailable- 3: name presentation restrictedConfidential DAVISCOMMS (S) PTE LTD 49 /136
Page 7 and 8: DC3500 AT Commands Reference Manual
Page 9: DC3500 AT Commands Reference Manual
Page 14 and 15: 4.4. Request product serial number
Page 20 and 21: 4.16. PCCA STD-101 [17] select wire
Page 26 and 27: 5.12. Service class selection and i
Page 36 and 37: Defined values parameter sets/shows
Page 44 and 45: Defined values may be:- 0: query th
Page 70 and 71: 7.27. Price per unit and currency t
Page 86 and 87: 8.19. Select cell broadcast message
Page 92 and 93: 9.15. Phase C received EOL alignmen
Page 98 and 99:
DC3500 AT Commands Reference Manual
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
11.4. SIM-APPL-TK terminal profile
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
12.1.4. Quality of service profile
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
12.1.14. Select service for MO SMS
Page 132 and 133:
12.3. Extended Packet Domain AT Com
Page 134 and 135:
Page 136:
show all

DC3500 AT Commands Manual 500242R01 ... - Cooking Hacks

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?