12.07.2015 Views

DC3500 AT Commands Manual 500242R01 ... - Cooking Hacks

DC3500 AT Commands Manual 500242R01 ... - Cooking Hacks

DC3500 AT Commands Manual 500242R01 ... - Cooking Hacks

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

6.7. Calling line identification restriction +CLIR<strong>DC3500</strong> <strong>AT</strong> <strong>Commands</strong> Reference <strong>Manual</strong> <strong>500242R01</strong>DescriptionThis command allows to control the calling line identification restriction supplementary service(GSM02.81). This command is abortable (proprietary feature).SyntaxCommand syntax: <strong>AT</strong>+CLIR=[]Command<strong>AT</strong>+CLIR=2Read command<strong>AT</strong>+CLIR?Test command<strong>AT</strong>+CLIR=?Possible response(s)OKorCME ERROR: +CLIR: ,OK+CLIR: (0-2)i.e. (list of supported s)OKDefined values parameter sets the adjustment for outgoing calls and may be:- 0: presentation indicator is used according to the subscription of the CLIR service- 1: CLIR invocation- 2: CLIR suppression parameter shows the subscriber CLIR status in the network and may be:- 0: CLIR nor provisioned- 1: CLIR provisioned in permanent mode- 2: unknown- 3: CLIR temporary mode presentation restricted- 4: CLIR temporary mode presentation allowed6.8. Connected line identification presentation +COLPDescriptionThis command allows the control of the connected line identification presentation supplementaryservice, useful in case of call forwarding of the connected line. When enabled and call allowed thefollowing intermediate result code is sent to TE before any +CR or V.25ter responses:+COLP: ,[,,[,]]This command is abortable (proprietary feature).SyntaxCommand syntax: <strong>AT</strong>+COLP=Command<strong>AT</strong>+COLP=1Read command<strong>AT</strong>+COLP?Test command<strong>AT</strong>+COLP=?Possible response(s)OKorCME ERROR: +COLP: ,OK+COLP: (0,1)i.e. (list of supported s)OKDefined values parameter sets/shows the result code presentation status in the TA and may be:- 0: disable- 1: enable parameter shows the subscriber COLP service status in the network and may be:- 0: COLP not provisioned- 1: COLP provisionedConfidential DAVISCOMMS (S) PTE LTD 37 /136

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!