DC3500 AT Commands Manual 500242R01 ... - Cooking Hacks

More documents

Recommendations

Info

DC3500 AT Commands Reference Manual 500242R0112.1.11. GPRS mobile station class +CGCLASSDescriptionThis set command allows to set the MT to operate according to the specified GPRS mobile class.SyntaxCommand syntax: AT+CGCLASS=[]CommandPossible response(s)AT+CGCLASS=”B”OKorCME ERROR: Read command+CGCLASS: AT+CGCLASS?OKTest command+CGCLASS: (list of supported s)AT+CGCLASS=?OKDefined values is a string parameter indicating the GPRS mobile class; it may be (in descending order offunctionality):- A: class A // only supported if UMTS_SUPPORT is enabled- B: class B- CG: class C in GPRS mode- CC: class C in circuit switched mode12.1.12. GPRS event reporting +CGEREPDescriptionThis set command enables or disables sending of unsolicited result codes +CGEV: XXX from MT tothe TE in case of certain events occurring in the GPRS MT or the network.SyntaxCommand syntax: AT+CREREP=[[,]]The following unsolicited result codes are defined:- +CGEV: REJECT , means that a network request for PDP contextactivation occurred when the MT was unable to report it to the TE with a +CRING unsolicitedresult code and was automatically rejected- +CGEV: NW REACT ,,[] means that the network hasrequested a context activation- +CGEV: NW DEACT ,,[] means that the network has forceda context deactivation- +CGEV: ME DEACT ,,[] means that the mobile equipmenthas forced a context deactivation- +CGEV: NW DETACH means that the network has forced a GPRS detach- +CGEV: ME DETACH means that the mobile equipment has forced a GPRS detach- +CGEV: NW CLASS means that the network has forced a change of MS class;the highest available class is reported- +CGEV:ME CLASS means that the mobile equipment has forced a change of class;the highest available class is reported.CommandAT+CGEREP=1,1Read commandAT+CGEREP?Test commandAT+CGEREP=?Possible response(s)OKorCME ERROR: +CGEREP: ,OK+CGEREP: (list of supporteds),(list of supporteds)OKConfidential DAVISCOMMS (S) PTE LTD 128 /136
DC3500 AT Commands Reference Manual 500242R01Defined values controls the processing of unsolicited result codes specified within this command; it may be:- 0: buffer unsolicited result codes in the MT; if buffer full the oldest ones will be discarded- 1: discard unsolicited result codes when V.24 link is reserved (online); otherwise forwardthem directly to the TE- 2: buffer unsolicited result codes in the MT when link reserved (online) and flush them to theTE when the link becomes available; otherwise forward them directly to the TE controls the effect on buffered codes when 1 or 2 is entered; it may be:- 0: MT buffer unsolicited result codes defined within this command is cleared when 1 or 2 is entered- 1: MT buffer of unsolicited result codes defined within this command is flushed to the TEwhen 1 or 2 is entered (OK is given before flushing the codes).12.1.13. GPRS network registration status +CGREGDescriptionThis set command controls the presentation of an unsolicited result code +CGREG: when=1 and there is a change in the MT’s GPRS network registration status, or code +CGREG:[,,] when =2 and there is a change in the network cell.SyntaxCommand syntax: AT+CGREG=[]CommandAT+CGREG=1Read commandAT+CGREG?Test commandAT+CGREG=?Possible response(s)OKorCME ERROR: +CGREG: ,[,,]OK+CGREG: (list of supported s)OKDefined values may be:- 0: disable network registration unsolicited result code- 1: enable network registration unsolicited result code- 2: enable network registration information unsolicited result code +CGREG:[,,] may be:- 0: not registered, home network- 1: registered, home network- 2: not registered, but ME is currently searching a new operator to register to- 3: registration denied- 4: unknown- 5: registered, roaming string type containing two byte location area in hexadecimal format string type containing two byte cell ID in hexadecimal formatConfidential DAVISCOMMS (S) PTE LTD 129 /136
Page 7 and 8:
DC3500 AT Commands Reference Manual
Page 9:
Page 12 and 13:
Page 14 and 15:
4.4. Request product serial number
Page 16 and 17:
Page 18 and 19:
Page 20 and 21:
4.16. PCCA STD-101 [17] select wire
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
5.12. Service class selection and i
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Defined values parameter sets/shows
Page 38 and 39:
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Defined values may be:- 0: query th
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
7.27. Price per unit and currency t
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
Page 78 and 79: DC3500 AT Commands Reference Manual
Page 86 and 87: 8.19. Select cell broadcast message
Page 92 and 93: 9.15. Phase C received EOL alignmen
Page 118 and 119: 11.4. SIM-APPL-TK terminal profile
Page 124 and 125: 12.1.4. Quality of service profile
Page 130 and 131: 12.1.14. Select service for MO SMS
Page 132 and 133: 12.3. Extended Packet Domain AT Com
Page 136: DC3500 AT Commands Reference Manual
show all

DC3500 AT Commands Manual 500242R01 ... - Cooking Hacks

Create successful ePaper yourself

Delete template?

Save as template?