DC3500 AT Commands Manual 500242R01 ... - Cooking Hacks

DC3500 AT Commands Reference Manual 500242R01indicates the state of GPRS attachment- 0: detached- 1: attachedindicates the state of PDP context activation- 0: deactivated- 1: activatednumeric parameter that indicates the type of application for which theUMTS bearer service is optimised; values:- 0: conversational- 1: streaming- 2: interactive- 3: background- 4: subscribed valuea numeric parameter (0,1,2,…) that indicates the targeted timebetween request to transfer an SDU at one SAP to its delivery at theother SAP, in milliseconds. If the parameter is set to '0' the subscribedvalue will be requested.a numeric parameter (1,2,3,…) that specifies the relative importancefor handling of all SDUs belonging to the UMTS bearer compared tothe SDUs of other bearers. If the parameter is set to '0' the subscribedvalue will be requested.dot-separated numeric (0-255) parameters on the form ‘t.m’.12.3.2. Define Secondary PDP context +CGDSCONTDescriptionThis command allows to specify specific PDP context parameter values for a PDP context, identifiedby the local context identification parameter . If the command is used only with the oneparameter , it means that the corresponding PDP context becomes undefined.SyntaxCommand syntax: AT+CGDSCONT=[,[,[,]]]CommandPossible response(s)AT+CGDSCONT=1 OKorCME ERROR: Read command+CGDSCONT: ,,,AT+CGDSCONT?[+CGDSCONT:,,,[...]]Test commandAT+CGDSCONT=?OK+CGDSCONT: (range of s),(list of s for definedprimary contexts),,,,(list of supporteds),(list of supported s)[+CGDSCONT: (range of s),(list of s fordefined primary contexts),,,,(list of supporteds),(list of supported s),[...]]OKConfidential DAVISCOMMS (S) PTE LTD 134 /136