Busch-Watchdog presence detector Type: 6131-74-101

More documents

Recommendations

Info

ABB i-bus ® EIBBusch-Watchdog presence detectorType: 6131-74-101Communication objectsNo. Type Object name Function0 1bit Movement channel 1 Telegr. switch1 1bit Movement channel 1 Activation3 1bit Movement channel 2 Telegr. switch4 1bit Movement channel 2 Activation6 1bit Movement HVAC Telegr. switch7 1bit Movement HVAC ActivationCommunication objectswith sending of value telegramsNo. Type Object name Function0 1byte Movement channel 1 Telegr. value1 1bit Movement channel 1 Activation3 1byte Movement channel 2 Telegr. value4 1bit Movement channel 2 Activation6 1byte Movement HVAC Telegr. value7 1bit Movement HVAC ActivationCommunication objectswith brightness-dependent switchingNo. Type Object name Function…2 1bit Brightness dependent Activationswitching channel 1…5 1bit Brightness dependent Activationswitching channel 2…May 2002 2 - 79
ABB i-bus ® EIBBusch-Watchdog presence detectorType: 6131-74-101Parameters for “Low Access”The default setting for the valuesis printed in bold type.Parameters for presence detector with “Low Access”:General:– Behaviour on bus voltage recovery(communication objects)Only if brightness object is enabled:– Brightness dependent switching disabled(Illumination channel 1)enabled– Brightness dependent switching disabled(Illumination channel 2)enabled– Movement disabled(Illumination channel 1)enabled– Movement disabled(Illumination channel 2)enabled– Movement disabled(HVAC)enabledSeparate for illumination channels 1 and 2:– Activation object movement not availableavailableOnly if object is available:– enabling movement at ON telegramOFF telegram–Type of movement object Switching (EIS 1)– Sending at detection ON telegramOFF telegramON telegram cyclicallyOFF telegram cyclicallyno telegram–Telegram after recovery timeON telegramOFF telegramON telegram cyclicallyOFF telegram cyclicallyno telegram– Time base for cyclical sending 130 ms / 2.1 s / 34 s / 9 min– Time factor for cyclical sending 10HVAC:– Activation object movement not availableavailableOnly if object is available:– enabling movement at ON telegramOFF telegram–Type of movement object Switching (EIS 1)– Sending at detection ON telegramOFF telegramON telegram cyclicallyOFF telegram cyclicallyno telegram–Telegram after recovery timeON telegramOFF telegramON telegram cyclicallyOFF telegram cyclicallyno telegram– Time base for cyclical sending 130 ms / 2.1 s / 34 s / 9 min– Time factor for cyclical sending 102 - 80 May 2002
Page 1 and 2: ABB i-bus ® EIBBusch-Watchdog pres
Page 11: ABB i-bus ® EIBBusch-Watchdog pres

Busch-Watchdog presence detector Type: 6131-74-101

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?