Busch-Watchdog presence detector Type: 6131-74-101

ABB i-bus ® EIBBusch-Watchdog presence detectorType: 6131-74-101Parameters for ‘High Access”The default setting for the valuesis printed in bold type.Additional parameters for “High Access”:Separately for illumination channels 1 and 2:– Activation object brightness not availabledependent switchingavailableOnly if activation object movement is available:– at disabling the movement do not send a telegramsend telegram at movement oncesend telegr. once after detection– at enabling the movement do not send a telegramsend telegram at movement oncesend telegr. once after detection–Type of movement object Switching (EIS 1)Value (EIS 6)Only if “Value (EIS 6)” is selected:– Sending at detection 100% / 90 % / … / 10 % / OFF /no telegram–Telegram after recovery time 100% / 90 % / … / 10 % / OFF /no telegramAdjustments channel 1:– Threshold illumination adjustable ETSwithLux1 potentiometerOnly if “ETS” is selected:– Threshold illumination 100(5 lux … 1000 lux)– Recovery time adjustable with ETSIllumination potentiometerOnly if “ETS” is selected:– Potentiometer should not be at TEST– Time base of recovery time 0.5 ms / 8.2 ms / 130 ms / 2.1 s /34 s / 9 min– Time factor of recovery time 100– Light source switchedcontrolled (constant brightness)Adjustments channel 2:– Threshold illumination adjustable ETSwithHVAC potentiometerOnly if “ETS” is selected:– Threshold illumination 100(5 lux … 1000 lux)– Recovery time adjustable with ETSIllumination potentiometerOnly if “ETS” is selected:– Potentiometer should not be at TEST– Time base of recovery time 0.5 ms / 8.2 ms / 130 ms / 2.1 s /34 s / 9 min– Time factor of recovery time 100– Light source switchedcontrolled (constant brightness)May 2002 2 - 81