EZ-Guide Plus Lightbar Guidance System Getting Started Guide

Setting the units and languageBy default, the units are set to US and the language is set to English. To change:• the units to metric, select Lightbar / Units• the language to Portuguese, Spanish, French, German, or Italian, selectLightbar / LanguageChanging the display orientationGenerally, mount the lightbar with the LEDs abovethe screen (upright). If you mount the lightbar withthe LEDs below the screen (inverted), selectLightbar / Lightbar Mount and change the setting.UprightInvertedConfiguring the displaySelect Lightbar / Display Config to enable or disable anyof the following items displayed on the plan andperspective maps. Set:• Progress Lines to On to give a sense of perspectiveand speed.• Adjacent Swaths to On to display one swath eitherside of the current swath.• Field Boundary to On if the field is a Headland.• AB Line to On to display the AB Line.• Path Display to the relevant option to display the path driven. See Path Display onthe Summary screen, page 19.You can also use this screen to change the View option:• Auto: The view automatically changes between plan and perspective views inheadlands• Fixed: The view remains fixedPath Display on the Map and 3D screenBy default, the path you have driven is always displayedon screen as a dotted line.18 Getting Started EZ-Guide Plus Lightbar Guidance System Getting Started Guide