EZ-Guide Plus Lightbar Guidance System Getting Started Guide

Menu Menu option Description Default valueWarnings Back to Main Menu Returns to main menu —Headland WarningOffline WarningLow Acc WarningTurn the headland warning ON or OFF.Configure the warning lead time.Distance off-swath at which the offline warningmessage appears. Set to zero to disable thewarning.High Acc Only – Accept only high accuracypositions.Warn Low Acc – Accept all positions, but warnwhen low accuracy.No Warning – Accept all positions, includingless accurate positions, without warning.Warning – ONLead time – 0s0' 0"Audible Warning Turn the audible warning alarm ON or OFF. OFFGPS Back to Main Menu Returns to main menu. —GPS DiagnosticsDisplay GPS receiver status and diagnosticinformation.DGPS Diagnostics View DGPS satellite diagnostic information. —GPS LimitsCorrections 2Min Satellites5Max HDOP3.0Min Elevation 18"Min SNR 1 40.0Configure receiver correction options.Warn Low AccFilter 2 Configure GPS filter settings. Depends on receiverSubscription 3 View OmniSTAR VBS or XP/HP subscription —expiry informationDefaults Back to Main Menu Returns to main menu. —Restore DefaultsReturn all configuration settings to factorydefaults.About... — Display lightbar version information. GPS Rate – 5Hz NMEAPass Code — Enables/disables the configuration protectionpass code.1 These options are only available when you have a lightbar with an integrated receiver, the high accuracy smartantenna, or the high accuracy box antenna.2 These options are only available when you have a lightbar with an integrated GPS receiver or are using a TSIPcapableexternal receiver with the Data Port Setting Input set to TSIP External.3 These options are only available on TSIP-capable receivers that support OmniSTAR corrections.——OffEZ-Guide Plus Lightbar Guidance System Getting Started Guide Overview of the Menu 57