EZ-Guide Plus Lightbar Guidance System Getting Started Guide

Deleting all AB Lines1. Select 9 to enter the Guidance Pattern screen.2. Select Delete All AB’s. The Warning screen appears.3. Select Yes to delete all AB Lines. The GuidancePattern screen appears.4. Select a new field pattern to create and then presso.5. Set the swath width and implement width.6. Select Exit and then press o.The main screen appears.NudgeNudging moves the guidance line back to the correct path. Nudge a guidance line ifyou need to correct for:• GPS position drift when returning to the field for guidance, for example afterpausing or turning the unit off and on• GPS satellite constellation changes while driving in the fieldOn the ground – Vehicle online with current swath/row.On screen – Vehicle offline.Nudge left to correct.Nudge is always applied to the guidance line relative to the vehicle heading. To nudge,select 1 or 3 from the action icons.The default nudge increment value is 0.02 m (0' 1"). To change the amount by whichnudge increases:1. Select Guidance / Nudge Increment. The NudgeIncrement screen appears.2. Press u or D to select the required nudge incrementand then press o.EZ-Guide Plus Lightbar Guidance System Getting Started Guide Getting Guidance 33