EZ-Guide Plus Lightbar Guidance System Getting Started Guide

Configuring Guidance SettingsYou can configure the guidance and warning settings of the EZ-Guide Plus lightbarguidance system to suit your personal preference and your application.Guidance settingsConfigure the following lightbar settings from the Guidance menu.LED modeModeChasePullDefinitionChase the lights to stay online. The lights represent the swath locationrelative to the vehicle.Center the lights to stay online. The lights represent the vehiclelocation relative to the swath.LED spacingThe LED spacing is the distance represented by one LED. Decrease the LED spacing toincrease the sensitivity of the LEDs.Look aheadUse the look ahead time to predict your future vehicle path to allow for reaction timeand vehicle turn speed. Set the look ahead time in seconds. For larger vehicles thattake longer to turn, increase the time.Note — For 4WD articulated tractors, always set the look ahead time to 0 seconds.Auto-detect turnThis setting is used only for the Adaptive Curve pattern. This setting defaults to On,which means that a new swath is automatically generated when a U-turn is detected.To manually identify the end of each adaptive curve swath, change this setting to Off.Terrain compensationFor terrain compensation information, refer to the EZ-Steer System Reference Guide.EZ-Guide Plus Lightbar Guidance System Getting Started Guide Configuring Guidance Settings 39