Commercial Treadmill Owner's Manual

C O M M E R C I A L P R O D U C T S D I V I S I O NIn Pause mode,you pressSPEED ▲RESETThis is what happens...,Exits pause mode and starts the running belt moving again sothat you can resume where you left off.Displays the WORKOUT SUMMARY banner. You can scanthrough your workout statistics (TIME, DISTANCE, CALORIES)by pressing the CHANGE key. Note that the TIME display showsthe accumulated workout time including warm-up and cool downperiods. To exit the summary state, press RESET again or waituntil the time limit (2 minutes) elapses. Thedisplay returns to the Precor banner.Note: The factory setting for pause mode is 2 minutes (120 seconds). The clubhas the option to change the setting. A duration can be set between 1 and 120seconds and limits how long a user can pause his or her workout. Refer to ClubInformation on page 21.In Cool down,you pressSTOPSPEED ▲This is what happens...,Enters Cool down - pause mode. The running belt slows to agradual stop. TIME stops counting. The display features remain,so you can review your workout statistics. Note that thePause mode has a time limit and the club has the option tochange the setting. If you enter pause mode during your cooldown, it is of limited duration.Once you press STOP and enter the Cool down-pause mode,the SPEED ▲ key causes the running belt to begin movingagain and returns to your cool down, so that you can resumewhere you left off. TIME continues to count down.Note: The club has the option to limit the cool down session. A duration can be setbetween 1 and 5 minutes. Refer to Club Information on page 21.At the WorkoutSummary banner,you press This is what happens,...page 34RESETReturns to the Precor banner. When you complete the cooldown period (or exit from a paused mode by pressing RESET),the WORKOUT SUMMARY banner appears. Workout statisticsexcept TIME, DISTANCE and CALORIES reset to zero.(Note that the TIME display shows the accumulated workouttime including warm-up and cool down periods.) You are given2 minutes to review your workout statistics before the displayautomatically resets to the Precor banner. You can also pressRESET, to return to the Precor banner.