User Manual - Amazon S3

● ●Color SpaceAdjusts the range of colors that can be expressed on screen. Auto automatically adjusts thecolor space depending on the input signal, and Native applies a range that is wider than the inputsignal. Custom allow the user to manually adjust a range of the desired color in the colors of theinput signal. Try Now● ●White BalanceAdjusts the color temperature of the picture to make white objects look white and the overallpicture appear natural. Adjust each color's luminosity with the offset menu and the brightnesswith the gain menu. To restore the default values, select Reset. Try Now● ●10p White BalanceAdjusts the white balance by adjusting the brightness of the red, green, and blue elements in10-point intervals. This option is only available when Picture Mode is set to Movie and may notbe supported by some external devices. Try Now● ●GammaAdjusts the primary color intensity. Try Now● ●Expert PatternDisplays picture calibration patterns on the screen without using a separate pattern generator orfilter. Pattern1 is used to calibrate the contrast, and Pattern2 is used for calibrating the color andcolor saturation. If the screen menu disappears or a different menu is activated while the screenis being calibrated, this option will save the changes up to that point and automatically deactivatethat menu. This feature is enabled in Component and HDMI modes only. Try Now● ●Motion LightingAdjusts the picture brightness depending on the on-screen movements for reduced powerconsumption. This feature is only available when Picture Mode is set to Standard and is notavailable in 3D mode. In addition, adjusting Contrast or Brightness automatically deactivates thisfeature. Try Now