User Manual - Amazon S3

555 From the IP Settings screen, set IP Setting to Enter manually, enter IP Address, Subnet Mask,Gateway, and the DNS Server values, and then select OK.IP SettingsIP SettingEnter manuallyIP Address 0.0.0.0Subnet Mask 0.0.0.0Gateway 0.0.0.0DNS SettingEnter manuallyDNS Server 0.0.0.0OKCancel666 The TV attempts to connect to the network again using the specified settings. A confirmationmessage is then shown once a connection is established. Select OK to proceed.Using the WPS ButtonIf the router has a WPS push button, you can use it to connect the TV to the router automatically. WPSautomatically configures the SSID and WPA key settings.111 Setting Network type to Wireless automatically displays a list of available wireless networks.222 Select WPS(PBC) and then press the router's WPS button within two minutes.333 The TV automatically acquires the SSID and security key settings and connects to the network. Aconfirmation message is then shown once a connection is established. Select OK to proceed.