User Manual - Amazon S3

For the S9 modelsPlug the cable into the One Connect IR connector and then point the transmitter at the other end ofthe cable towards the external device's remote panel receiver. However, there can' be any obstaclesbetween the IR extension cable and the external device. The presence of an obstacle will interfere withthe transmission of the remote panel signal.""The color and design of the IR Extender may vary depending on the model.Add the External Device111 Turn on the external device you wish to set up universal remote function for and then press theSOURCE button to bring up the Source screen.222 Select Universal Remote Setup from the top of the screen. This initiates the universal remotesetup process.333 Follow the on-screen instruction and set up the universal remote control. If it does not work, setup the remote control by entering the model number manually.Using the Universal Remote ControlBy configuring the universal remote control feature for a connector to which an external device isalready connected, you can use the Smart Touch Control as a universal remote control simply bysending the input signals to the corresponding connector.Registered External Device ManagementUniversal Remote Setup screen, select a registered external device.● ●Source Setup: Change the TV's input connector that the external device is connected to.● ●● ●● ●Synced Power off: Configure the external device to turn off when the TV is turned off.Rename: Rename the registered external device (up to 15 characters long).Delete: Remove the registered external device.