User Manual - Amazon S3

Anynet+ (HDMI-CEC) Device MenuOnce the TV has switched over to the selected device, you can access the device's menu using theTV's remote panel. Select the virtual remote panel's TOOLS button to display the list. Select Anynet+(HDMI-CEC) from the list. The following Anynet+ device options will appear. The displayed Anynet+device options may vary depending on the external device.● ●View TV: Select this to switch the remote panel mode to the TV.● ●● ●● ●● ●● ●Device List: Displays a list of Anynet+ (HDMI-CEC) devices connected to the TV. To change adevice, select a desired device in the list.(Connected Device) MENU: Display the menu of the connected device. If the target device is aDVD player, the DVD menu is shown.(Connected Device) Tools: Display a list of frequently-used functions that are available for thedevice. If the target device is a DVD player, the DVD playback menu is shown. Some externaldevices may not support this option.(Connected Device) Title Menu: Display the connected device's title menu. If the target device isa DVD player, the DVD title menu is shown. Some external devices may not support this option.Receiver: Listen to audio from the connected external device through an AV receiver, such as ahome theater system, instead of the TV speakers. This option is only available when there is anAV receiver connected to the TV. The menu may not be shown with receivers that support audioonly.ARCARC enables digital sound to be output using just an HDMI cable. However, ARC is only available withAV receivers that support ARC.To use ARC, enable it from the Anynet+ (HDMI-CEC) device menu Receiver.