Developement Of An Instrument Landing Simulation ... - Cal Poly

More documents

Recommendations

Info

********************************************************************* path_init --* Dummy module -- not needed by slave********************************************************************/void path_init( void ){}/********************************************************************* eom_init --* Dummy module -- not needed by slave********************************************************************/int eom_init( GV_Geometry geoset, GV_Obi inst, GV_Obi terrain,G_Position *pos_init, G_Rotation *rot_init, float speed_init ){(void) geoset ;(void) inst ;(void) terrain ;(void) pos_init ;(void) rot_init ;(void) speed_init ;return G_FAILURE;106
}/********************************************************************* slave_init --* Initialize the communications interface -- called once* by the slave to establish communications with the host********************************************************************/int slave_init( void ){int status = G_SUCCESS;static char * sktNameServer = "slave" ;static char * sktHostPeer = NULL ; /* anybody */GV_Obi cursor;GV_Scene scene;int temp;float x=-1, y=-2, z=-3, psi=-4, theta=-5, phi=-6;WSADATA info;if(WSAStartup(MAKEWORD(1,1), &info)==SOCKET_ERROR){fprintf( stdout, "slave_get_data: error reading from socket\n" );return (G_FAILURE);}107
Page 1 and 2:
Development of an Instrument Landin
Page 3 and 4:
Approval PageTITLE: Development of
Page 5:
AcknowledgementsI would like to tha
Page 8 and 9:
Figure 17: Front Cockpit IOS.......
Page 10 and 11:
4.7.2 Throttle Calibration.........
Page 12 and 13:
the simulation is transportable to
Page 14 and 15:
development. These models had to be
Page 16 and 17:
and right views respectively.Spiege
Page 18 and 19:
The stick is connected to the stick
Page 20 and 21:
Currently, the only console card in
Page 22 and 23:
an output, it is sent from either t
Page 24 and 25:
2.3 Computer SoftwareThe four compu
Page 26 and 27:
2.3.4 TCP-IP/UDPSince the computers
Page 28 and 29:
2.4 Analog OutputThe simulation sen
Page 30 and 31:
This channel also is etched into th
Page 32 and 33:
3. Simulation Operations Procedures
Page 34 and 35:
3.2.1.2 Engine ModelThe engine mode
Page 36 and 37:
3.2.1.5 Instrument ModelThe instrum
Page 38 and 39:
3.2.2.1 Times Two TutorialThis is a
Page 40 and 41:
4.1.1 Terrain DatabaseFurther devel
Page 42 and 43:
showing the pilot where he needs to
Page 44 and 45:
4.6 ProjectorsThe Visuals for the P
Page 46 and 47:
Table 1: Instrument Calibration Che
Page 48 and 49:
By adjusting the potentiometersetti
Page 50 and 51:
5. Simulator Implementation:The mos
Page 52 and 53:
5.4 Guidance and ControlsThe simula
Page 54 and 55:
and visually see how an aircraft pe
Page 56 and 57:
14. Hill and Peterson, Mechanics an
Page 58 and 59:
Documentation:Introduction to Pheag
Page 60 and 61:
Stick ModelBelow is the Stick Model
Page 62 and 63:
SixDOF ModelThis page describes the
Page 64 and 65:
Standard Atmosphere ModelThis page
Page 66 and 67: Tutorial #1: Times Two TutorialThis
Page 68 and 69: Tutorial #2: Speed of Sound Tutoria
Page 70 and 71: B.1 Engine_Mod.c/* S-function engin
Page 72 and 73: * Also see Pheagle_HTML** Copyright
Page 74 and 75: ssSetInputPortWidth(S, 0, 13);//12
Page 76 and 77: * TSFCslAB=*uPtrs[8];* rho=*uPtrs[9
Page 78 and 79: y[6]=RRPM;y[7]=LRPM;y[8]=RTemp;y[9]
Page 80 and 81: High By-pass Engine: Engine Type =
Page 82 and 83: LThrust=LThrottle*Thrust;//printf("
Page 84 and 85: Calculate the Left Engine Nozzle Po
Page 86 and 87: B.2 Spool.c/***********************
Page 88 and 89: {ssSetNumSFcnParams(S, 0);if (ssGet
Page 90 and 91: * Initialize the state. Note, that
Page 92 and 93: * for performing any tasks that sho
Page 94 and 95: * S-function ils_modelB.3 ILS_Model
Page 96 and 97: #define S_FUNCTION_NAME ils_model//
Page 98 and 99: * Function: mdlInitializeSampleTime
Page 100 and 101: {InputRealPtrsType uPtrs = ssGetInp
Page 102 and 103: Theta2 = pi+Theta1;Theta3 = -((2*pi
Page 104 and 105: B.4 Server.c/**********************
Page 106 and 107: struct sockaddr_in you; // the outg
Page 108 and 109: #define MDL_START#if defined(MDL_ST
Page 110 and 111: {// This function sets the server s
Page 112 and 113: B.5 Server.h/**********************
Page 114 and 115: B.6 Slave.c/***********************
Page 118 and 119: create the socketsocket_num=socket(
Page 120 and 121: host_data.ownrot.x = psi;host_data.
Page 122 and 123: B.7 ModHostData.h/*****************
show all

Developement Of An Instrument Landing Simulation ... - Cal Poly

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?