Medical Applications Guide (Rev. B - Mouser Electronics

Consumer and Portable Medical DevicesWireless Interface, RFID and Tag-it13➔Low-Power, Multi-Standard HF RFID ReadersTRF7960,TRF7961Get samples and datasheets at:www.ti.com/sc/device/TRF7960 or www.ti.com/sc/device/TRF7961Complementing the Tag-it HF-I family of transponder inlays, is theTRF7960; a highly integrated analog front end and data framing systemfor any 13.56MHz RFID reader system. Built-in programming optionsmake it useful for a wide range of applications both in proximityand vicinity RFID systems. Its high level of integration, excellentperformance, miniature size and multiple low power modes allowsthe TRF7960 to be used for battery power-constrained medicalapplications.Applications• Asset tracking• Access control• Blood bag tracking• Medical supply tracking• Patient and staff authentication• Pharmaceutical authentication• Medical imaging and data tracking• Product authentication and calibration• Remote digital healthcare management• And many other non-medical related applicationsKey Features• Supports ISO14443A/B, ISO15693 and Tag-it• Completely integrated protocol handling (OSI Model Layer 3 andbelow)• Programmable output power: (100mW or 200mW)• Wide operating voltage range: 2.7V to 5.5 V• Separate, internal high-PSRR LDOs for analog, digital and PAsections provide noise isolation for superior read range and reliability• Parallel 8-bit or Serial 4-pin SPI interface with 12-byte FIFO• Seven, user selectable, ultra-low power modes• Power down: