30➔Diagnostic, Patient Monitoring and TherapyPulse OximetryDual, Current-Input, 20-Bit Charge Digitizing ADCDDC112Get samples, datasheets, evaluation modules and app reports at:www.ti.com/sc/device/DDC112The DDC112 is a dual input, wide dynamic range, charge-digitizingADC which allows low-level current output ICs to be connecteddirectly to its inputs. Charge integration is continuous as each inputuses two integrators; while one is being digitized, the other isintegrating. In addition to the internal programmable full-scaleranges, external integrating capacitors allow an additional usersettable,full-scale range of up to 1000pC. A high-speed serialshift register, which holds the result of the last conversion, canbe configured to allow multiple, cascaded DDC112s, minimizinginterconnections.Key Features• Single-chip solution for measuring photodiodes• High precision, true integrating function• Low noise: 3.2ppm, rms• Outstanding linearity: ±0.005% INL reading ±0.5ppm FSR• Programmable full-scale: 50 to 1000pc• Single supply: +5V supply• Packaging: SO-28, TQFP-32<strong>Applications</strong>• Blood analysis• Liquid/gas chromatography• Direct photosensor digitization• Infrared pyrometry1.1nV/ Hz Noise, Low-Power,Precision Op AmpOPA211Get samples, datasheets, evaluation modules and app reports at:www.ti.com/OPA211The OPA211 series achieves very low 1.1nV/ Hz noise density witha supply current of only 3.6mA. It offers rail-to-rail output swing tomaximize dynamic range. In precision data acquisition systems, theOPA211 provides
Diagnostic, Patient Monitoring and Therapy31Component Recommendations for Pulse Oximeter <strong>Applications</strong>➔Component RecommendationsComponent Description Key Features Benefits Other TI SolutionsAmplifiersIVC102 Transimpedance Amp Precision switched integratorOPA211 Precision Op Amp 1.1nV/ Hz noise at 1kHz, 3.6mA/ch supply, 80MHz BW Unity gain stable, RRO, shutdown OPA227OPA335 5V Op Amp 5µV offset, 0.05µV/ºC drift, 350µA supply current OPA735OPA336 Op Amp 125µV offset, 1.5µV/ºC drift, 32µA supply currentOPA350 Op Amp 500µV V OS , 38MHz, 2.5V to 5V supplyOPA353 MicroAmplifier Series High speed, single supply, rail-to-railOPA363 Op Amp 1.8V, high CMR, RRIO, shutdown OPA364OPA380 Transimpedance Amp 90MHz GBW, over 1MHz transimpedance BW25µV offset (max), 0.1µV/ºC drift (max)OPA703 12V Op Amp CMOS, rail-to-rail I/OOPA725 12V Op Amp Very low noise, high speed, 12V CMOS OPA727Data ConvertersADS8320 High Speed ADC 16-bit, 100kHz sample rate, 2.7V to 5V supply microPower operation: 1.8mW at 100kHz and 2.7V ADS8321, ADS8325DDC101DDC112 Dual Current Input ADC Wide dynamic range, charge digitizing, 20-bit ADC Single-chip solutionReferencesREF31xy Voltage Reference 0.2% voltage accuracy Precise trigger voltage ADC REF32xy, REF33xyREF32xx Low Drift, Bandgap 0.2% (max) accuracy, 7ppm/°C (max) drift, 0.1mA (max) I Q Multiple output voltages, SOT23-6REF33xx microPower Bandgap 0.1% (max) accuracy, 30ppm/°C (max) drift, 0.005mA (max) I Q Multiple output voltages, MSOP-8, SO-8REF50xx Precision Reference 0.05% accuracy, 3ppm/°C (max) drift, 6µV PP low noise Multiple output voltages, SC71ProcessorsTMS320C5000 DSP Power efficient, high performanceTMS320F28x DSP 32-bit fixed point code, up to 150MIPs operation Combination of DSP performance and MCU integrationGenerationTMS320VC5506 DSP 200MHz, dual MAC, very low stand-by power of 0.12mW Supported by eXpressDSP and many other software TMS320V5509Apackages and toolsTMS320V5502MSP430F20xx Ultra Low Power 2 KB Flash, 128 B RAM, SPI+I 2 C 8 ch. 12-bit ADC or 4 ch. 16-bit SD ADC, 4x4 mm16-bit MCUpackageMSP430F22x4 Ultra Low Power 32 KB Flash, 1 KB RAM, SPI + I 2 C + UART/LIN + IrDA 12 ch. 10-bit ADC, 2 op.amps16-bit MCUMSP430F23x0 Ultra Low Power 32 KB Flash, 2 KB RAM, SPI + I 2 C + UART/LIN + IrDA Analog comparator, HW multiplier16-bit MCUMSP430F15x Ultra Low Power 32 KB Flash, 1 KB RAM, SPI + I 2 C + UART, DMA, SVS 8 ch. 12-bit ADC, 2 ch.12-bit DAC, analog comparator16-bit MCUMSP430F16x Ultra Low Power 60 KB Flash, 2 KB RAM, SPI + I 2 C + UART, DMA, SVS 8 ch. 12-bit ADC, 2 ch.12-bit DAC, analog comp,16-bit MCUHW multiplierMSP430F16xx Ultra Low Power 55 KB Flash, 10 KB RAM, SPI + I 2 C + UART, DMA, SVS 8 ch. 12-bit ADC, 2 ch.12-bit DAC, analog comp,16-bit MCUHW multiplierMSP430F41x Ultra Low Power 4 KB Flash, 256 B RAM, SVS, 96 segment LCD Analog comparator16-bit MCUMSP430F42x0 Ultra Low Power 32 KB Flash, 256 B RAM, 56 segment LCD 5 ch. 16-bit SD ADC, 12-bit DAC16-bit MCUMSP430F42x Ultra Low Power 32 KB Flash, 1 KB RAM, SPI + UART, SVS, 128 segment LCD 3 x 16-bit SD ADC16-bit MCUMSP430F43x Ultra Low Power 32 KB Flash, 1 KB RAM, SPI + UART, SVS, 160 segment LCD 8 ch. 12-bit ADC, analog comparator16-bit MCUMSP430FG43x Ultra Low Power 60 KB Flash, 2 KB RAM, SPI + UART, SVS, 128 segment LCD 12 ch. 12-bit ADC, 2 ch. 12-bit DAC, DMA, 3 op amps16-bit MCUPreview products are listed in bold blue.New products are listed in bold red.Texas Instruments 2Q 2007<strong>Medical</strong> <strong>Applications</strong> <strong>Guide</strong>
- Page 1 and 2: TMTechnology for InnovatorsMedical
- Page 3 and 4: Consumer and Portable Medical Devic
- Page 6: 6➔Consumer and Portable Medical D
- Page 9 and 10: Consumer and Portable Medical Devic
- Page 11 and 12: Consumer and Portable Medical Devic
- Page 13: Consumer and Portable Medical Devic
- Page 16 and 17: 16➔Consumer and Portable Medical
- Page 18 and 19: 18➔Consumer and Portable Medical
- Page 20 and 21: 20 Diagnostic, Patient Monitoring a
- Page 22 and 23: 22➔Diagnostic, Patient Monitoring
- Page 24 and 25: 24➔Diagnostic, Patient Monitoring
- Page 26 and 27: 26➔Diagnostic, Patient Monitoring
- Page 28 and 29: 28➔Diagnostic, Patient Monitoring
- Page 32 and 33: 32➔Diagnostic, Patient Monitoring
- Page 34 and 35: 34➔Diagnostic, Patient Monitoring
- Page 36 and 37: 36➔Diagnostic, Patient Monitoring
- Page 38 and 39: 38➔Diagnostic, Patient Monitoring
- Page 40 and 41: 40➔Diagnostic, Patient Monitoring
- Page 42 and 43: 42➔Diagnostic, Patient Monitoring
- Page 44 and 45: 44➔Diagnostic, Patient Monitoring
- Page 46 and 47: 46➔Diagnostic, Patient Monitoring
- Page 48 and 49: 48➔Medical ImagingUltrasound/Port
- Page 50 and 51: 50➔Medical ImagingUltrasound/Port
- Page 52 and 53: 52➔Medical ImagingUltrasound/Port
- Page 54 and 55: 54➔Medical ImagingComponent Recom
- Page 56 and 57: 56➔Medical ImagingCT ScannersDual
- Page 58 and 59: 58➔Medical ImagingComponent Recom
- Page 60 and 61: 60➔Medical ImagingMagnetic Resona
- Page 62 and 63: 62➔Medical ImagingMagnetic Resona
- Page 64 and 65: 64➔Medical ImagingComponent Recom
- Page 66 and 67: 66➔Medical ImagingDigital X-Raybl
- Page 68 and 69: 68➔Medical ImagingDigital X-RayLo
- Page 70 and 71: 70➔Medical ImagingPET ScannersPET
- Page 72 and 73: 72➔Medical ImagingComponent Recom
- Page 74 and 75: 74➔Medical ImagingPower Managemen
- Page 76 and 77: 76 Medical Instruments➔Medical In
- Page 78 and 79: 78➔Medical InstrumentsMedical Ins
- Page 80 and 81:
80 Resources➔Enhanced ProductTexa
- Page 82 and 83:
82➔ResourcesTI Design ToolsBelow
- Page 84:
TMTechnology for InnovatorsFindProd