12.07.2015 Views

Medical Applications Guide (Rev. B - Mouser Electronics

Medical Applications Guide (Rev. B - Mouser Electronics

Medical Applications Guide (Rev. B - Mouser Electronics

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

24➔Diagnostic, Patient Monitoring and TherapyECG/Portable ECG and EEGPrecision, Rail-to-Rail I/O InstrumentationAmplifierINA326Get samples, datasheets, evaluation modules and app reports at:www.ti.com/sc/device/INA326The INA326 is a precision instrumentation amplifier with rail-to-railinput and output and with true single-supply operation it offers verylow DC errors and input common-mode ranges that extend beyond thepositive and negative rails. Excellent long-term stability and very low1/f noise assure low offset voltage and drift throughout the life ofthe product.Key Features• Low offset: 100µV (max)• Low offset drift: 0.4µV/°C (max)• Excellent long-term stability• Very low 1/f noise• Input common-mode range: 200mV below negative rail to 100mVabove positive rail• Wide output swing: within 10mV of rails• Single supply: +2.7V to +5.5V• Packaging: MSOP-8, MSOP-10<strong>Applications</strong>• <strong>Medical</strong> instrumentation• Multi-channel data acquisition systems• Low-level transducer amplifier for bridges, load cells, thermocouples• Wide dynamic range sensor measurements4-/8-Channel, 16-Bit, Serial Output ADC forPortable <strong>Applications</strong>ADS8341, ADS8342, ADS8343, ADS8344, ADS8345www.ti.com/sc/device/PARTnumber(Replace PARTnumber with ADS8341, ADS8342, ADS8343, ADS8344 orADS8345)The ADS8341 is a 4-channel, 16-bit ADC with synchronous serialinterface. Typical power dissipation is 8mW at a 100kHz throughputrate and a +5V supply. The reference voltage can be varied between500mV and V CC , providing a corresponding input voltage range of 0Vto V REF . It is tested down to 2.7V operation. The serial interface alsoprovides low-cost isolation for remote data acquisition.Key Features• Conversion rate: up to 100kHz• 4-/8-channel single-ended or 2-channel differential input• SINAD: 86dB• Serial interface• Single supply: 2.7V to 5V• Packaging: SSOP-16<strong>Applications</strong>• Test and measurement• Data acquisition• Battery-powered devicesSARDCLKV+ V-2 7V IN–14INA32685V 3IN+R 1R 2 C 26V OG = 2(R 2 /R 1 )CH0CH1CH2CH3COMV REFFourChannelMultiplexerCDACComparatorSerialInterfaceandControlCSSHDNDINDOUTBUSYADS8341 functional block diagram.INA326 functional block diagram.<strong>Medical</strong> <strong>Applications</strong> <strong>Guide</strong> Texas Instruments 2Q 2007

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!