SINAMICS S120 Functi.. - Gregbotos.com

Operating ModesInformation on commissioning vector motor typesInduction motors, rotatingThe following parameters can be entered in STARTER during the commissioningphase:Table 3-20Motor data, rating plateParameter Description Commentsp0304 Rated motor voltage If this value is not known, then a“0” can also be entered. Usingthis value, the stator leakageinductance can be moreprecisely calculated (p0356,p0357).p0305 Rated motor current –p0307 Rated motor power –p0308 Rated motor power factor –p0310 Rated motor frequency –p0311 Motor rated speed –p0335 Motor cooling type –The following parameters can be optionally entered:Table 3-21Optional motor datap0320Parameter Description CommentsMotor rated magnetizationcurrent/short-circuit currentp0322 Maximum motor speed –p0341 Motor moment of inertia –p0342 Moment of inertia, ratio total to –p0344 Motor weight –p0350 Motor stator resistance, cold –p0352Cable resistance (component ofthe stator resistance)p0354 Motor rotor resistance, cold –p0356 Motor stator inductance –p0358 Motor rotor leakage inductance –p0360 Motor magnetizing inductance –p0640 Current limit This value is limited to amaximum of 4 * p0305.The value is pre-assigned with1.5 * p0305 duringcommissioning.p1080 Minimum speed ––© Siemens AG 2006 All Rights ReservedSINAMICS S120 Function Manual, 03/2006 Edition3-171