Hand-held Pendant Stations - EUCHNER GmbH + Co. KG

Hand-held Pendant StationsHand-held pendant stations HBASffProgrammable pulse generatorffTamper-proof emergency stop deviceaccording to EN ISO 13850,dual-channelffMembrane keypad with 20 keys and2 LEDsffLCD display with LED backgroundlighting, switchable 4-line/8-columnor 8-line/16-columnffRS422 interface, 3964R protocolDimension drawingHBAS-07294985S1HBAS-099105HBAS-09459438,5Depending on version:ff2 pushbuttons, 2-stage, 1 NO contacteach, e.g. for enabling functionff1 enabling switch, 3-stage,2 NO contactsffCoiled cable stretchable to 3.5 mffStraight connection cable, length 10 m160S2S3NotesffHolder HBA for hand-held pendant stations:see accessories page 58ffAssociated male flange connector, 19-pin:see accessories page 45ffActiveX module available for integrating theuser’s applications (for MS Windows ® -baseduser programs with ActiveX support)2 pushbuttons2-stage, right and left1 enabling switch3-stage, leftMountingmagnetCable lengthstretched3,500 mmCable length10,000 mmPlug connector19-pinCable lengthstretched3,500 mmTechnical dataParameter Value UnitHBA housingMaterialPlasticColor Gray RAL 7040Operating temperature 0 ... +50 °CStorage temperature -20 ... +50 °CDegree of protection according to EN 60529 / NEMA IP 65 / 250-12Connection Spiral cable, stretchable to 3.5 m, or straight connection cable, length 10 m.Plug connector, 19-pinWeight Approx. 0.85 kgPulse generatorPulsesprogrammableOutput specificationsRS422AEmergency stop deviceStandard EN ISO 13850Switching elements2 NC contactsUtilization category according to IEC 60947-5-1 DC-13, U e 24 V, I e 3 A ACommunications interfaceTypeSerial, RS422A (4-wire)Data format8 data bits + 1 parity bit (even), 1 stop bitTransfer speed9600 or 19200 baud, automatic detectionTransfer protocol3964RElectrical connectionPower supply 24 ± 20% V DCOperating current, max. 100 mAPushbutton, 2-stage, e.g. for enabling functionSwitching elements2, one NO contact eachSwitching voltage max. 30 V DCSwitching current max. 100 mAEnabling switch ZXE, 3-stageSwitching elements1, 2 NO contactsUtilization category according to IEC 60947-5-1DC-13, U e 24 V, I e 0.1 A18Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.