Hand-held Pendant Stations - EUCHNER GmbH + Co. KG

Hand-held Pendant StationsHand-held pendant station HBM-112392ffHandwheel 100 pulses, wear-freemagnetic detent mechanismffTamper-proof emergency stop deviceaccording to EN ISO 13850,dual-channelff1 enabling switch, 3-stage,2 NO contactsff9 illuminated foil pushbuttons, 1 NOcontact each, can be labeled asrequired using slide-in stripsffStraight connection cable, length3.5 m, plug connector 35-pinDimension drawing200S1S3S4S6S7S992S5S8Exchangeable slide-in stripsS11S10Mounting magnetS2Enabling switch3-stage, leftMounting magnet82A13500NotesffHolder HBM for hand-held pendant stations:see accessories page 58ffAssociated flange connector, 35-pin:see connection components page 51ffFor template for slide-in strips, seewww.euchner.de (Support)ffReplacement for hand-held pendant stationsHBE-097337 and HBE-097338Plug connector35-pinTechnical dataParameter Value UnitHBM housingMaterialPlasticColorAnthraciteOperating temperature 0 ... +50 °CStorage temperature -20 ... +50 °CDegree of protection according to EN 60529 / NEMA IP 65 / 250-12ConnectionStraight connection cable, length 3.5 m, plug connector 35-pinWeight Approx. 1.1 kgHandwheelPulses/revolution 100Power supply 5 ± 5% V DCOutput specificationsRS422AEmergency stop deviceStandard EN ISO 13850Switching elements2 NC contactsUtilization category according to IEC 60947-5-1 DC-13, U e 24 V, I e 3 A AEnabling switch ZXE, 3-stageSwitching elements1, 2 NO contactsUtilization category according to IEC 60947-5-1DC-13, U e 24 V, I e 0.1 AMembrane keypadSwitching elements14, one NO contact eachSwitching voltage max. 30 V DCSwitching current max. 100 mABreaking capacity max. 1 W22Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.