Hand-held Pendant Stations - EUCHNER GmbH + Co. KG

Hand-held Pendant Station HBA KitBottom shell HBAffMaterial plasticffColor gray or blackDimension drawing8532,522,4Depending on version:ffHole for emergency stop deviceffHole for enabling switch ZXE(3-stage, 2 NO contacts)ff2 pushbuttons, 2-stage, 1 NO contacteach, e.g. for enabling function5018,5NotesffSuitable emergency stop device (turn or pullto reset) see page 54ffSuitable enabling switch ZXE (3-stage, 2 NOcontacts) see page 55ffTechnical data of pushbutton see page 481605570A25Pushbutton(optional)Mounting magnet5Mounting screws(6 x included)+0,2016,2 - 0,12Cable gland(included)A20,515Hole foremergency stop(optional)Hole forenabling switch ZXE(optional)Enabling switch ZXE,see page 5522,5Ordering tableVersion/itemBottom shell HBA-105503, color gray(without holes, without pushbutton)Bottom shell HBA-105504, color grayBottom shell HBA-114213, color grayBottom shell HBA-105506, color grayBottom shell HBA-105507, color black(without holes, without pushbutton)Bottom shell HBA-105508, color blackBottom shell HBA-114215, color blackBottom shell HBA-105510, color blackHole foremergency stop device●for emergency stopshort and long designs●for emergency stopshort and long designs●for emergency stopshort design●for emergency stopshort and long designs●for emergency stopshort and long designs●for emergency stopshort designFeatures2 pushbuttons, * 1 enabling switch ZXE, **2-stage, 1 NO contact each3-stage,pre-assembled,2 NO contactse.g. for enabling function pre-assembledS1, S2 S1Order no.105503105504● 114213● 105506105507105508● 114215● 1055102123123* Travel diagram see page 6** Travel diagram see page 55Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.35