Hand-held Pendant Stations - EUCHNER GmbH + Co. KG

Accessory Kit for all Designs of Hand-held Pendant StationPushbuttonDimension drawingControl panel thicknessmax. 3 mmPanel cut-out Fixing nut Packing ring5,15∅ 13,65M12x1∅ 16,8∅13,60SW 14∅1512,5612,9021Technical dataParameter Value UnitAmbient temperature -25 ... +70 °CFront degree of protection (integrated in front panel) IP 67Switching principleButton, snap-action switching elementSwitching elements1 NO contactSwitching voltage 30 V DCSwitching current max. 100 mAConnectionSoldered connectionOrdering tableItemOrder no.Pushbutton, black button 083640Pushbutton, red button 086753Pushbutton, green button 086754Pushbutton, blue button 086757Pushbutton, white button 086755Pushbutton, yellow button 086756Illuminated pushbutton (can be individually labeled)Dimension drawing10,5 29 18Ø1818max. 6,5Panel cut-outWiring diagram15 +0,0501,7 0-0,116 +0,201 32 4ab-+Technical dataParameter Value UnitAmbient temperature -25 ... +55 °CFront degree of protection (integrated in front panel) IP 65Switching principleButton, snap-action switching elementSwitching elements1 NO contact, 1 NC contactSwitching current max. 100 mASwitching voltage max. 30 V AC/DCLED24 V / 14 mAConnectionSoldered connectionOrdering tableItemOrder no.Pushbutton, illuminated, can be individually labeled (yellow LED) 074991Pushbutton, illuminated, can be individually labeled (white LED) 09804548Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.