Hand-held Pendant Stations - EUCHNER GmbH + Co. KG

Accessory Kit for Hand-held Pendant Stations HBA/HBMEMERGENCY STOP devices according to EN ISO 13850ffWith pull-to-reset buttonffEMERGENCY STOP device for housingHBA/HBM without enabling switch ZXE,3-stageDimension drawing4940 37,52,825NotesffThe EMERGENCY STOP device engages whenactuated by pressing, unlocks when pulled, andis overload-proofffDo not use with housing HBA/HBM with 3‐stageenabling switch ZXEPanel cut-outSocket yellow255Pushbutton red6.1218+0,2Ø 16,2 0Terminal assignmentTechnical dataParameter Value UnitActuating elementColor of actuating buttonRedColor of bottom partYellowSwitching elements2, one positively driven contact eachDegree of protection IP 65Utilization category according to IEC 947-5-1DC-13 U e 24 V I e 3 AffWith turn-to-reset buttonffEMERGENCY STOP device forhousing HBA/HBMffBottom of housing yellowDimension drawingFront panel thickness0,50,8 - 4,5Socket yellowPushbutton red2,8Panel cut-out+0,23,2 0NotesffThe EMERGENCY STOP device engages whenactuated by pressing, unlocks when turned orpulled, and is tamper proof10,23,615,9 20,6295,4+0,217,9 0+0,216,2 0Terminalassignment11211222Technical dataParameter Value UnitActuating elementColor of actuating buttonRedColor of bottom partYellowSwitching elements2 positively driven contactsDegree of protection IP 65Connection ratings24 V DC / 3 AOrdering tableItemOrder no.EMERGENCY STOP device (pull-to-reset button) with 2 switching elements, 1 positively driven contact each, long design 096298EMERGENCY STOP device (pull-to-reset button and turn-to-reset button), 2 positively driven contacts, short design 106435Blind plug for EMERGENCY STOP device mounting hole 08365354Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.