Hand-held Pendant Stations - EUCHNER GmbH + Co. KG

More documents

Recommendations

Info

Accessory Kit for all Designs of Hand-held Pendant StationRotary knobDimension drawing2,716∅ 18,7∅ 17∅ 14,5∅ 3,2∅ 10∅ 7∅ 113,8 13,5Nut coveringOrdering tableItem Detent angle Order no.Selector switch, 2 detent positions, 1 of 2, break-before-make 1) 30° 097026Selector switch, 3 detent positions, 1 of 3, break-before-make 1) 30° 097027Selector switch, 4 detent positions, 1 of 4, break-before-make 1) 30° 097028Selector switch, 5 detent positions, Gray code, short circuited 2) 22.5° 097029Selector switch, 6 detent positions, Gray code, short circuited 2) 22.5° 097030Selector switch, 7 detent positions, Gray code, short circuited 2) 22.5° 097031Selector switch, 8 detent positions, Gray code, short circuited 2) 22.5° 097032Selector switch, 12 detent positions, Gray code, short circuited 2) 22.5° 097033Selector switch, 16 detent positions, Gray code, short circuited 2) 22.5° 097034Rotary knob, matt black with a marking, collet mounting for axis 3.2 mm – 0971411) break-before-make: all outputs are open between the switch positions.2) short circuited: the related outputs are connected between the switch positions.Key-operated rotary switchDimension drawingPanel cut-outConnection circuit diagram14.6C18AC1 33511.5max.4.527A1.715min18.2 4Technical dataParameter Value UnitAmbient temperature -25 ... +55 °CFront degree of protection (integrated in front panel) / NEMA IP 65 / 250-12Switching principleSnap-action switching elementSwitching element1 NO contact, 1 NC contactSwitching voltage max. 30 V AC/DCSwitching current max. 250 mAConnectionSoldered connectionOrdering tableItemOrder no.Key-operated rotary switch Key removable in both positions 083639Replacement key 09238650Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Accessory Kit for all Designs of Hand-held Pendant StationPlug connectorNumberof pinsD L Cable Ø35 40.2 103 8.0 - 12.028 37.2 97 8.0 - 12.023 33.9 91 6.0 - 10.012 27.5 81 5.5 - 9.5Dimension drawingFlange connectorsBuilt-inOn the rearOn the frontNumber of pins A B maxC maxD maxG maxL M N P35 34.9 14.6 17.3 25.7 39.9 31.8 34.1 37.7 3.128 31.7 14.6 17.3 25.7 36.8 29.4 30.9 34.5 3.123 28.5 11.4 13.3 24.1 33.6 27 27.8 31.3 3.112 22.2 11.4 13.3 24.1 28.8 22.9 21.4 25 3.1Short-circuit plugNumberof pinsD L LK35 40.2 84 25528 37.2 78 25523 33.9 72 25212 27.5 59.4 251Dimension drawing∅ DLLK3 strands enclosed(0.34 mm²/60 mm long)Lug forM3 screwTechnical dataParameter Value UnitConnecting plug/flange socketHousing materialMetalNumber of pins 12 / 23 / 28 / 35Degree of protection according to EN 60529 (inserted) / NEMA IP 65 / 250-12Ordering tableItem Connection Order no.Plug connector, 35-pin with pin contacts Crimp contacts (included) * 074395Plug connector, 28-pin with pin contacts Crimp contacts (included) * 074394Plug connector, 23-pin with pin contacts Crimp contacts (included) * 074393Plug connector, 12-pin with pin contacts Crimp contacts (included) * 086748Flange socket, 35-pin with socket contacts Crimp contacts (included) * 074386Flange socket, 28-pin with socket contacts Crimp contacts (included) * 074385Flange socket, 23-pin with socket contacts Crimp contacts (included) * 074384Flange socket, 12-pin with socket contacts Crimp contacts (included) * 086749Short-circuit plug with chain, 35-pin Crimp contacts (included) * 083459Short-circuit plug with chain, 28-pin Crimp contacts (included) * 083458Short-circuit plug with chain, 23-pin Crimp contacts (included) * 083457Short-circuit plug with chain, 12-pin Crimp contacts (included) * 087802* Suitable crimping tool Burndy (www.burndy.com) Y16RCM Crimping tool for machined contactsSuitable extraction tool Burndy (www.burndy.com) RX2025GE1 Extraction toolSubject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.51
Page 5 and 6: GeneralStandards and approvalsStand
Page 7: Hand-held Pendant StationsAs can be
Page 18 and 19: Hand-held Pendant StationsHand-held
Page 28 and 29: Hand-held Pendant Stations28Subject
Page 30 and 31: Hand-held Pendant Station HBA KitHB
Page 32 and 33: Hand-held Pendant Station HBA KitHB
Page 34 and 35: Hand-held Pendant Station HBA KitTo
Page 36 and 37: Hand-held Pendant Station HBA KitFr
Page 38 and 39: Hand-held Pendant Stations HBM KitT
Page 40 and 41: Hand-held Pendant Stations HBM KitF
Page 42 and 43: Hand-held Pendant Stations HBL KitH
Page 44 and 45: Hand-held Pendant Stations HBL KitF
Page 46 and 47: Accessories for Hand-held Pendant S
Page 48 and 49: Accessory Kit for all Designs of Ha
Page 52 and 53: Accessory Kit for all Designs of Ha
Page 54 and 55: Accessory Kit for Hand-held Pendant
Page 56 and 57: Accessory Kit for Hand-held Pendant
Page 58 and 59: Holders for Hand-held Pendant Stati
Page 60 and 61: Electronic HandwheelsFunction and t
Page 62 and 63: Electronic HandwheelsHandwheel HKBf
Page 64 and 65: Electronic HandwheelsHandwheel HKCf
Page 66 and 67: Electronic HandwheelsHandwheel HKDf
Page 68 and 69: Electronic HandwheelsHandwheel HWAf
Page 70 and 71: Electronic HandwheelsHandwheel HWBf
Page 72 and 73: fElectronic HandwheelsAccessoriesFr
Page 74 and 75: ∅ 8AppendixDimension drawing - HB
Page 76 and 77: AppendixRequest form for hand-held
Page 78 and 79: AppendixRequest form for hand-held
Page 80 and 81: AppendixHand-held pendant stations
Page 82 and 83: Item IndexItem Order no. Page Item
Page 84 and 85: Item IndexOrder no. Item Page Order
Page 86 and 87: RepresentativesInternationalAustral
Page 88: ENEUCHNER GmbH + Co. KGKohlhammerst

Hand-held Pendant Stations - EUCHNER GmbH + Co. KG

Create successful ePaper yourself

Delete template?

Save as template?