Hand-held Pendant Stations - EUCHNER GmbH + Co. KG

Hand-held Pendant Station HBA KitHBA housing without handwheelffCable gland for cable diameter5‐10 mmffRubber-coated mounting magnet onthe rear of housingff6 fixing domes for printed circuit boardinstallation in top shellDepending on version:ffHole for emergency stop device(sealed with blind plug)ff2 pushbuttons, 2-stage, 1 NO contacteach, e.g. for enabling functionff1 enabling switch, 3-stage,2 NO contactsDimension drawingS1HousingHBA-084450HBA-086155∅ 85S2HousingHBA-095562Blind plug in holefor emergency stop device38,5Mounting magnetNotesffSuitable front panels see page 36ffSuitable emergency stop device (turn or pullto reset) see page 54ffAttention: Housing HBA-095562 is suitableonly for emergency stop device 106435 withshort design.ffDepending on version with 2 2-stage pushbuttonsor 1 3-stage enabling switch.160Enabling switch,3-stageCable glandincludedTopshellDimensions of emergency stop devices see page 54Technical dataParameter Value UnitHBA housingMaterialPlasticColor Gray RAL 7040Operating temperature 0 ... +50 °CStorage temperature -20 ... +50 °CDegree of protection according to EN 60529 / NEMA IP 65 / 250-12Weight 0.3 kgPushbutton, 2-stage, e.g. for enabling functionSwitching elements2, one NO contact eachConnection ratingsDC 30 V / 100 mAEnabling switch ZXE, 3-stageSwitching elements2 NO contactsUtilization category according to IEC 60947-5-1DC-13, U e 24 V, I e 0.1 A30Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.