Hand-held Pendant Stations - EUCHNER GmbH + Co. KG

More documents

Recommendations

Info

Electronic HandwheelsFunction and technology used in handwheelsThe change from a handwheel directly coupled to the spindle or axesto CNC-controlled axes has meant dramatic new developments for thehandwheels. The rotation of the handwheel generates square-wave outputs.The CNC axis controller evaluates the pulses and so signals the axis tomove. With over 20 years of handwheel experience, EUCHNER providesa wide selection of handwheels built with the finest quality and highestpossible reliability.Daily use of handwheels places high demands on the mechanical functioning.With twin bearings and a wear-free detent mechanism, the EUCHNERhandwheels are the optimum choice for trouble-free operation. The detentmoment maintains position even in the event of machine vibration. Thedetent moment and 100 or 25 pulses per revolution allow a desired value tobe set quickly, reliably and accurately. In addition to the manual positioningof axes with CNC-controlled machines, EUCHNER also offers handwheelsused for medical and telecommunication applications. EUCHNER alsooffers handwheels for these applications.60Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Electronic HandwheelsMagnetic detent mechanismHandwheels with magnetic detent are characterized by their absolutelywear-free and noiseless detent mechanism.With 100 detent positions (100 or 25 pulses)The detent mechanism is generated by a magnetic field. A combination of100 magnetic north/south positions is generated by the opposing magneticfields with one revolution of the handwheel. Thanks to an air gap, thedetent mechanism has no wear and is absolutely maintenance-free. Withtwo ball bearings, the bearing assembly of the handwheel can withstandhigh axial and radial forces. Different circuit outputs are available for allcurrent control systems.There are three different designs available:ffDesign HKB- Ideal for flat machine panels and small, light hand-held pendantstations.Mechanical detent mechanismHandwheels with mechanical detent are characterized by their light weightand shallow mounting depth.With 100 detent positions (100 or 25 pulses)A toothed rotor working in conjunction with a roller creates the detentmechanism. The roller is pushed between the teeth of the rotor by aspring and dial. The detent moment is produced by the movement of theroller over the teeth.There are two different designs available:ffDesign HWA- Suitable for installation in operator panels.- Suitable for installation in EUCHNER hand-held pendant stations- With center point fixingHandwheel HWAffHandwheel HKBDesign HKC- Suitable for installation in operator panels- Its design makes it particularly suitable for flat operator panelsffDesign HWB- Suitable for installation in operator panels- With 3-point fixingHandwheel HWBHandwheel HKCffDesign HKD- Suitable for installation in operator panels and EUCHNER handheldpendant stations from series HBL- Suitable for installation in universal turning and milling machinesfor axis movement, for exampleHandwheel HKDSubject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.61
Page 5 and 6:
GeneralStandards and approvalsStand
Page 7:
Hand-held Pendant StationsAs can be
Page 18 and 19: Hand-held Pendant StationsHand-held
Page 28 and 29: Hand-held Pendant Stations28Subject
Page 30 and 31: Hand-held Pendant Station HBA KitHB
Page 32 and 33: Hand-held Pendant Station HBA KitHB
Page 34 and 35: Hand-held Pendant Station HBA KitTo
Page 36 and 37: Hand-held Pendant Station HBA KitFr
Page 38 and 39: Hand-held Pendant Stations HBM KitT
Page 40 and 41: Hand-held Pendant Stations HBM KitF
Page 42 and 43: Hand-held Pendant Stations HBL KitH
Page 44 and 45: Hand-held Pendant Stations HBL KitF
Page 46 and 47: Accessories for Hand-held Pendant S
Page 48 and 49: Accessory Kit for all Designs of Ha
Page 54 and 55: Accessory Kit for Hand-held Pendant
Page 56 and 57: Accessory Kit for Hand-held Pendant
Page 58 and 59: Holders for Hand-held Pendant Stati
Page 62 and 63: Electronic HandwheelsHandwheel HKBf
Page 64 and 65: Electronic HandwheelsHandwheel HKCf
Page 66 and 67: Electronic HandwheelsHandwheel HKDf
Page 68 and 69: Electronic HandwheelsHandwheel HWAf
Page 70 and 71: Electronic HandwheelsHandwheel HWBf
Page 72 and 73: fElectronic HandwheelsAccessoriesFr
Page 74 and 75: ∅ 8AppendixDimension drawing - HB
Page 76 and 77: AppendixRequest form for hand-held
Page 78 and 79: AppendixRequest form for hand-held
Page 80 and 81: AppendixHand-held pendant stations
Page 82 and 83: Item IndexItem Order no. Page Item
Page 84 and 85: Item IndexOrder no. Item Page Order
Page 86 and 87: RepresentativesInternationalAustral
Page 88: ENEUCHNER GmbH + Co. KGKohlhammerst
show all

Hand-held Pendant Stations - EUCHNER GmbH + Co. KG

Create successful ePaper yourself

Delete template?

Save as template?