Hand-held Pendant Stations - EUCHNER GmbH + Co. KG

Hand-held Pendant Stations HBM KitBottom shell HBMffMaterial plasticffColor anthraciteDimension drawingDepending on version:ffHole for emergency stop device(sealed with blind plug)ffHole for enabling switch ZXE(3-stage, 2 NO contacts)ff2 pushbuttons, 2-stage, 1 NO contacteach, e.g. for enabling function92644440Version withemergency stop deviceand 2 pushbuttons4837,4325NotesffSuitable emergency stop device (turn or pullto reset) see page 54ffSuitable enabling switch ZXE (3-stage, 2 NOcontacts) see page 55ffTechnical data of pushbutton see page 483 x 40 (= 120)40762162,522,527,5195Pushbutton (optional)Cable gland (included)4766,5Hole foremergency stopwith blind plug(optional)Version withemergency stop deviceand enabling switch ZXEMounting magnet22Hole forenabling switch ZXE(optional)Enabling switch ZXEsee page 55Mounting screws(8 x included)Mounting screws(8 x included)Cable gland (included)Ordering tableVersion/itemHole foremergency stop deviceFeatures2 pushbuttons, *2-stage, 1 NO contact eachHole forpre-assembled,enabling switch ZXE **e.g. for enabling functionS1, S2 S1Order no.Bottom shell HBM-112949(without holes, without pushbutton)112949Bottom shell HBM-112954 ● 112954Bottom shell HBM-112958 ● ● 112958Bottom shell HBM-112955 ● ● 1129552123123* Travel diagram see page 6** Travel diagram see page 55Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.39