Hand-held Pendant Stations - EUCHNER GmbH + Co. KG

Electronic HandwheelsTechnical dataParameter Value UnitPulses per revolution 2 x 25 or 2 x 100Detent positions 100Housing materialPlastic/metalWeight 0.1 kgDetent mechanism MechanicalShaft loading, axial, max. 25 NShaft loading, radial, max. 40 NMechanical life, min. 1 x 10 6 Rev.Operating temperature 0 ... +50 °CStorage temperature -20 ... +50 °CAtmospheric humidity, max.80% (condensation not permissible)Front degree of protection acc. to EN 60529/IEC 529 IP65acc. to NEMA 250 250-12Output circuit RS422AOutput stageA05Output signals A, /A, B, /BOperating voltage U B 5 ± 10 % V DCOperating current, no load, max. 80 mAOutput specificationsAccording to RS422A, use RS422 differential receiver moduleOutput signals cw (clockwise rotation)100 pulsesA/AB/B90˚360˚Terminal assignmentDetent position areaScrew terminal T+5V 0V A A B BOutput circuit, push-pullOutput stage G05 G12Output signalsA, BOperating voltage U B 5 ± 10 % 12 ± 10 % V DCOperating current, no load, max. 20 mAOutput voltage HIGH (1), min. 4.0 V / 20 mALOW (0), max.0.5 V / 20 mAOutput current per output, max. 20 mAOutput signals CW (clockwise rotation)100 pulses25 pulses360˚360˚90˚90˚ABABTerminal assignmentDetent position areaScrew terminal T+U B 0V A BDetent position areasSubject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.69