Hand-held Pendant Stations - EUCHNER GmbH + Co. KG

Electronic HandwheelsTechnical dataParameter Value UnitPulses per revolution 2 x 25 or 2 x 100Detent positions 100Housing materialAluminumWeight 0.5 kgDetent mechanismMagneticShaft loading, axial, max. 25 NShaft loading, radial, max. 40 NMechanical life, min. 20 x 10 6 Rev.Operating temperature 0 ... +70 °CStorage temperature -25 ... +85 °CAtmospheric humidity, max.80% (condensation not permissible)Front degree of protection acc. to EN 60529/IEC 529 IP 65acc. to NEMA 250 250-12Resistance to vibrationVibrations (3 axes)Shock (3 axes)DIN/IEC 68-2-6DIN/IEC 68-2-27EMC protection requirements in accordance with CE EN 61000-6-2, EN 61000-6-4Output circuit RS422AOutput stageA05Output signals A, /A, B, /BOperating voltage U B 5 ± 5 % V DCOperating current, no load, max. 80 mAOutput circuitAccording to RS422A, use RS422 differential receiver moduleOutput signals cw (clockwise rotation)25 pulses100 pulses360˚360˚90˚75˚ 210˚A/AB/BA/AB/BDetent position areasDetent position areaTerminal assignment Ribbon cable V Screw terminal S/B /A 0V61U B 0V A /A B /BBAU BOutput circuit, push-pullOutput stage G05 G12 G24Output signalsA, BOperating voltage U B 5 ± 5 % 10 ... 30 V DCOperating current, no load, max. 80 mAOutput voltage HIGH (1), min. 4.0 V / 0 mA 4.9 V / 0 mA –3.4 V / 5 mA 3.9 V / 5 mA –3.0 V / 20 mA 3.6 V / 20 mA U B - 3 V / 20 mALOW (0), max. 1.3 V / 15 mA 1.3 V / 15 mA 3 V / 20 mAOutput current per output, max. 20 mAOutput signals cw (clockwise rotation)25 pulses100 pulses360˚360˚90˚75˚ 210˚ABABDetent position areasDetent position areaTerminal assignment Ribbon cable V Screw terminal S/B /A 0V61U B 0V A BBAU BSubject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.67