RCS1100 Series - Engineering Surveyor

More documents

Recommendations

Info

Complete displayHold for min. 2 seconds.The complete contents of therespective display is transfered if thedisplay is incomplete due todisturbances to the radio link. Thefunction is only available on theRCS.Working with the TPS1000 seriesThe instrumentation is set up andprepared in the same way as theTPS1100. The keyboard and displaydiffer somewhat from those in theother series and so a keyboardtemplate must be used with theRCS1100. The presentation in theRCS1100 of the dialogues from theTPS1000 differs slightly, but thisdoes not in any way restrict theoperation.The functions specific to the RCSare described in detail in theappropriate section of the usermanual for the TPS1000.The greatest differences are in thedisplay of the icons; this is due to thedifferent dimensions of the display.The time, and the battery status ofthe TPS1000, are displayedalternately in the title line.Instead of two lines of three statusfields, one line of four status fields isdisplayed on the right-hand margin.1. The first position normally showsthe status for the memory card.The operating mode is not shown,because remote control is onlypossible in RCS mode.2. The second position normallyshows the telescope face. If thecompensator cannot be read outat this time, the current display ofthe telescope face issuperimposed. If the compensatorhas been switched off, thesymbols for the compensator andfor the telescope face aredisplayed alternately.3. The third position shows thestatus symbol for the automatictarget recognition (LOCK).4. The last position shows the keymode.Operation24RCS1100-1.2.0en
Local functionsRCS\ COMPASSEnter compass readingsHz-Compass: 55 °V-Compass : -15 °CONTMCIQUITThe operating concept for the localfunctions is the same as in theTPS1100 and is therefore notexplained at this point.Illumination, battery andmonitoring of functionsKeep the key pressed down formore than two seconds. The batterystatus and the quality of the radiolink are displayed.678\ Illumination,...Battery : Radio: OKDisplay : XContrast : 70%Heating : XSleep : 5 MinutesBeep : LoudCONT DISP+ HEAT+ DEFLT15The contrast of the display can bealtered. The display illumination andthe heating at temperatures below -10°C (high power consumption!) canbe switched on and off.The key beep and the automaticswitchoff of the RCS1100 can bealtered.RCS1100-1.2.0en25Operation
Page 3 and 4: Product identificationThe instrumen
Page 6 and 7: ContentsIntroduction ..............
Page 8 and 9: Preparation, Setting upUnpackingThe
Page 10 and 11: Installing the TCPS26 on the tripod
Page 12 and 13: Switching onAfter all connections a
Page 14 and 15: Charging batteriesInserting and rem
Page 16 and 17: Software conceptThe RCS1100 has loa
Page 18 and 19: Working procedureWorking in RCS mod
Page 20 and 21: Definition of a Working Area (WORKA
Page 22 and 23: The input options are:• absolute
Page 26 and 27: Local functions, continuedConfigura
Page 28 and 29: Local functions, continued5. Call u
Page 30 and 31: Care and StorageTransport and Stora
Page 32 and 33: Safety directionsThe following dire
Page 34 and 35: Responsibilities (continued)Respons
Page 36 and 37: Hazards in use, continuedWARNING:In
Page 38 and 39: Electromagnetic acceptabilityThe te
Page 40 and 41: FCC statement (applicable in U.S.)O
Page 42 and 43: Radio modemConformity to national r
Page 44: Leica Geosystems AG, Heerbrugg, Swi

RCS1100 Series - Engineering Surveyor

Create successful ePaper yourself

Delete template?

Save as template?